HOW TO UPGRADE RAM/MEMORY TO 16GB IN MACBOOK PRO MID-2012 IN 2019

How to Upgrade RAM Memory inside MacBook Pro in 6 steps.

A 13” MacBook Pro Mid 2012 edition can hold up to 16GB of Ram

Things you’ll Need:
Macbook
RAM replacement
#00 Philips screwdriver
Nylon Pry tool (Anti-static)

Upgrade Links:

13in Mid-2012 Macbook Pro: https://amzn.to/3bmT625

SATA Cable 3.0 to 2.5 USB:
https://amzn.to/2VEGtZB

Samsung 1TB SSD Drive: https://amzn.to/31vqEbk

Plastic Feet: https://amzn.to/3gmLpud

Macbook 13in Replacement Battery:
https://www.ifixit.com/Guide/MacBook+Pro+13Inch+Unibody+Mid+2012+Battery+Replacement/10365

Alternative Mid-2012 Macbook Pro Battery on Amazon: https://amzn.to/34YcQrN

Crucial 16GB RAM: https://amzn.to/31AM9HL
Step 1: Use #00 Screwdriver to open up bottom of computer. Ten Screws all together.

The 3 top right scores on the MacBook are longer than the others. Remember this when installation is completed.

Step 2: Disconnect the Battery connector with Nylon Pry tool.

Step 3: To remove the memory, Push out the 2 plastic retaining bars until module pops up. Pull out and repeat for second one.

Step 4: To install new memory, line up notch in memory module , with pin in memory slot. And slide module in the lower slot at an angle until its fully seated. Then push down on module til it clicks into place. Repeat process for top module.

Step 5: Reconnect Battery connector

Step 6: Put screws back into place on bottom of laptop.
Now you are ready to turn on the laptop

Head over to my Youtube page for more how-to videos to help with upgrading your MacBook .

If you found this helpful, please like and subscribe.

Видео HOW TO UPGRADE RAM/MEMORY TO 16GB IN MACBOOK PRO MID-2012 IN 2019 канала D.A.T.A Productions Media