Vuze XR 360° Waterproof Case Quick Start Guide
The Vuze XR 360° Waterproof Sports Case is designed specifically for the Vuze XR Camera. Made from a clear poly-carbonate the Sports Case secures and protects your camera from dust, dirt, and water down to the depth of 30 meters (100 feet). Its two large polished domes cover the wide angle of the fish eye lenses and allow an unimpeded 360° view in and out of the water. With built-in, spring-loaded, controls there is no need to open the case to operate the camera. Hand-grips, rigs, and straps are easily mounted using a standard 1/4"-20 tripod mounting thread on the bottom of the enclosure.
Set up your Vuze XR Underwater Case by following these 5 simple steps:
1. Open up the case and check the O-Ring is correctly fitted – keep an eye out for any sand or debris that may have become trapped and be sure to clear this out!
2. Place your Vuze XR inside the case making sure the buttons of the camera are correctly aligned with the buttons on the case.
3. Carefully close the case making sure the camera is correctly aligned and then use your fingers to apply enough pressure to completely shut the case.
4. Once the case is fully closed hook over both of latches and snap them into place simultaneously – be sure to do this at the same time for a perfect seal!
5. Now give the case one final check all over to make sure it’s perfectly closed – be sure to pay particular attention to the seal, making sure there are no gaps and that the O-Ring is perfectly in place
Congratulations! You are now ready to start your Vuze XR underwater adventure.
Visit http://bit.ly/VuzeXR-WPC to learn more
Видео Vuze XR 360° Waterproof Case Quick Start Guide канала vuze.camera
Set up your Vuze XR Underwater Case by following these 5 simple steps:
1. Open up the case and check the O-Ring is correctly fitted – keep an eye out for any sand or debris that may have become trapped and be sure to clear this out!
2. Place your Vuze XR inside the case making sure the buttons of the camera are correctly aligned with the buttons on the case.
3. Carefully close the case making sure the camera is correctly aligned and then use your fingers to apply enough pressure to completely shut the case.
4. Once the case is fully closed hook over both of latches and snap them into place simultaneously – be sure to do this at the same time for a perfect seal!
5. Now give the case one final check all over to make sure it’s perfectly closed – be sure to pay particular attention to the seal, making sure there are no gaps and that the O-Ring is perfectly in place
Congratulations! You are now ready to start your Vuze XR underwater adventure.
Visit http://bit.ly/VuzeXR-WPC to learn more
Видео Vuze XR 360° Waterproof Case Quick Start Guide канала vuze.camera
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Sailing in Tel Aviv❄️ Vuze camera outdoors - Bright light & snow on Mt. Hermon Ski Resort ❄️Google Street View Summit, Japan, May 2017, Humaneyes Technologies presentationVuze camera drone footage - Amsterdam CanalsThis is David's Story, What is yours? [Vuze XR]Shark Reef Tunnel - Mandalay Bay AquariumHumaneyes Studio - Horizon stabilization for Vuze camera3D The Salon by SimcoemediaHornopiren - The Gate to PatagoniaVuze of London from the eyes of Ally Law, James Kingston and FriendsHumaneyes CEO, Shahar Bin-Nun interview to i24newsVuze Camera at CES 2018 - Meet Suzanne LagerweijWaterfall near Dead Sea3D Jam Session in Guitar Shop by SimcoemediaVW BUDD-e at CES 2016 - InteriorFlorida Boat TourVuze XR Camera - Just like Human eyes3D Drive Over Flint Bridge by SimcoemediaThe Birth of the Vuze XRCES 2018 - Booth Activities: Suzanne Lagerweij on VR business & Storytelling