Загрузка страницы

Volkswagen Polo 9n3, how to build xenon HID in your Volkswagen VW Polo 9n3, DIY

VW Polo 9n3, year 2005, 2006, 2007, 2008, 2009, how to build bi-xenon projector (HID) in your Volkswagen.

𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
https://www.retrofitlab.com/en/hid-projector-kit/mini-h1-twin-kit-bi-xenon-projector-kit-1.html?

𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:00 Put the headlight into the carton box for about 18 minutes and separate the glass of the housing by using a flat screwdriver and permaseal tools
1:03 Remove the halogen bulb holder
1:25 Put the rubber ring on the tail of the Mini H1 bi-xenon projector and screw the Mini Gatlin Gun shroud on the projector
2:05 Put the bi-xenon wires through the reflector and screw the nut on the tail after you place the H7 centric ring
2:26 Here we connect the bi-xenon wires to the high light. Now we do have new H1 splitters available what make this installation easier
3:05 Connect the bi-xenon plug of the projector to the halogen high light by our splitters (sorry for the fog in the video)
3:15 We drilled a hole (22mm) in the rubber cap for the wires
3:56 Here we put the butyl in the headlight. Don't forget to clean all parts inside before you close the headlight
4:17 Place the headlight in the carton box again for about 14 minutes. After that's done, press the glass into the housing
4:53 Screw the bulb holder back on the tail of the projector and put in the bulb
5:04 Connect the two plug in the original H7 plug
5:16 Final view

𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look

𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• VW Polo 9n3 (2005 - 2009)

𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
https://www.facebook.com/groups/EuropeanHeadlightCommunity/

𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: https://www.facebook.com/Retrofitlab/
Messenger: https://www.m.me/Retrofitlab/
Instagram: https://www.instagram.com/retrofitlab.com_official/
Our website: https://www.retrofitlab.com/

𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.

A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!

The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.

Do you have any questions? Do not hesitate to contact us, we are happy to help you out!

Good luck with your retrofit!

These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

Видео Volkswagen Polo 9n3, how to build xenon HID in your Volkswagen VW Polo 9n3, DIY канала Retrofitlab.com
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
18 марта 2015 г. 19:55:35
00:05:33
Яндекс.Метрика