How To Replace The Head Gasket and Intake Manifold Gaskets On A GM 3800 Engine

Here is a link to a kit similar to the one I used in this video for any ~95-05 GM 3.8/3.4/3.2 motor:
http://amzn.to/2ztqakw
In this walkthrough I replace the head gaskets, upper intake manifold (UIM) gaskets, and lower intake manifold (LIM) gaskets on a 1997 pontiac bonneville. These steps will be identical for almost any GM 3800 / 3400 / 3100 series II motor.

If you have any questions feel free to post them on the video and I'll do my best to try to help!

Here is a link to the the text walkthrough I used as a guide for making this video:
http://www.w-body.com/showthread.php/49858-Any-info-on-changing-series-2-3800-head-gaskets

Also here's a list of torque specs for most of the motor:

Camshaft Bolt: 74 ft/lbs + 90 degrees angle torque
Camshaft thrust plate: 132 in/lbs (T30 torx)
Front cover bolts: 15 ft/lbs + 40 degrees angle torque
Oil pan bolts: 125 in/lbs
Crank sensor nuts: 18 ft/lbs
Camshaft sensor bolts 48 in/lbs
Lifter hold-downs: 22 ft/lbs
Rocker bolts: 11 ft/lbs(132in/lbs) + 90 degrees angle torque
Lower intake bolts: 132 in/lbs
Supercharger bolts: 17ft/lbs
Crank Bolt: 111 ft/lbs + 76 degrees angle torque up to 10/98
111 ft/lbs +114 degrees angle torque 10/98 and up
Cylinder head bolts: 37 ft/lbs + 130 degrees + 30 degrees up to 10/98
37 ft/lbs + 120 degrees
Flywheel/flexplate bolts: 132 in/lbs + 50 degrees
Exhaust manifolds: stud/nuts 132 in/lbs
Nuts 156 in/lbs
Oil filter adapter to timing cover: 22 ft/lbs 97 earlier
132 in/lbs + 50 degrees 97 and later Oil pump
Cover to timing cover: 98 in/lbs
Pick up tube and screen: 132 in/lbs
Valve cover bolts: 89 in/lbs
Tstat bolts: 21 ft/lbs
Water Pump: 132 in/lbs + 80 degrees
Water pump pulley: 115 in/lbs
Throttle body: 84-89 in/lbs
Fuel rail nuts: 75-84 in/lbs

Видео How To Replace The Head Gasket and Intake Manifold Gaskets On A GM 3800 Engine канала Nick Stageberg