Fanuc CNC: Editing Ladder to add Auto Door, Hydraulic Clamping and Robot Interface
This video describes the process from start to finish about how to edit the PMC in a Fanuc controller to add controls for an Auto Door, Hydraulic Clamping, and Robot IO.
The clamping programming starts at the beginning of the video. The auto door programming starts at 28 minutes. The robot programming starts at 46 minutes. The best explanation of how to create a toggling bit is at 30 minutes. Some other logic changes to clean up operation happen near the end of the video.
In operation, M52 closes the door, M53 opens the door, M176 clamps the part, M177 unclamps the part.
The quality of the videography isn't great, but the content itself is okay.
Link to my video about naming Fanuc PMC registers or IO: https://youtu.be/TdUnMRbcUfQ
Link to SRAM Backup: https://youtu.be/jHNumN8h2iE
Видео Fanuc CNC: Editing Ladder to add Auto Door, Hydraulic Clamping and Robot Interface канала Eric Whittaker
The clamping programming starts at the beginning of the video. The auto door programming starts at 28 minutes. The robot programming starts at 46 minutes. The best explanation of how to create a toggling bit is at 30 minutes. Some other logic changes to clean up operation happen near the end of the video.
In operation, M52 closes the door, M53 opens the door, M176 clamps the part, M177 unclamps the part.
The quality of the videography isn't great, but the content itself is okay.
Link to my video about naming Fanuc PMC registers or IO: https://youtu.be/TdUnMRbcUfQ
Link to SRAM Backup: https://youtu.be/jHNumN8h2iE
Видео Fanuc CNC: Editing Ladder to add Auto Door, Hydraulic Clamping and Robot Interface канала Eric Whittaker
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Fanuc Robodrill: Periodic Tool Length CheckHighlights of Fabtech 2019Fanuc Ladder III Subroutine Copy from Machine A to B TipsCNC Robot Fanuc IO Link SetupFanuc CNC: SRAM back for new "i Plus" ControllerCube Box Setup VideoFanuc Robodrill: Inputting programs from USB to CNC memory.Fanuc CNC: Button Mapping and Indicator Light MappingBackup of ROM on Fanuc RobodrillFanuc CNC: Getting PMC Ladder from Control - i PlusDoosan CNC: Renishaw spindle probe setupSpaceX PACE Launch, Feb. 8, 2024Fanuc CNC: SRAM Backup, Fanuc Oi and olderFanuc 31iB CNC All Data BackupFanuc Robot: Payload Calculation GuideFanuc CNC: PMC ladder editing and bit namingManipulating G68 2 5 Axis Tilted Work PlanesFanuc CNC Ethernet IP Installation and Setup VideoMazak CNC: Editing ParametersFanuc Robot: Setting up Ethernet IP