UDOO BOLT GEAR Review - Ryzen Powered Maker Board

The UDOO BOLT GEAR is the most powerful Maker Board Ever created! Powered by an Embedded Ryzen APU The V1605B with boost clock up to 3.6 GHz and built-in Radeon Vega 8 Graphics this thing is a beast.
In this video, I do an overview of the UDOO Bolt GEAR hardware, accessories, Test out some PC games, run some Benchmarks, and test out some 4k video playback.

Learn More Here: https://www.udoo.org/udooboltgear/

More UDOO BOLT GEAR VIDEOS: https://www.youtube.com/playlist?list=PLm5JownUOeDWnALXKnNg_BzkXxVuVG7lI

Ryzen 3200G SSF Build: https://youtu.be/cZFpjWcSpoQ

UDOO BOLT SPECS:
Processor:
* CPU AMD Ryzen™ Embedded V1605B SoC up to 3.6 GHz (V8 version)
GPU:
* AMD Radeon™ Vega 8 Graphics - 8 GPU Compute Units (V8 version)
* RAM:
* 2x Slot SO-DIMM Dual-channel 64-bit DDR4 2400 MT/s with ECC support up to 32GB
* Microchip ATmega32U4 8-bit AVR RISC-based microcontroller.
* Video interfaces:
* 2x HDMI 1.4/2.0a
* 2x USB Type-C (DP alternate mode)
* Storage:
* 1x 32GB eMMC 5.0 High Speed Drive
* 1x SSD SATA module's Slot M.2 Socket 2 Key B 2242/2260 (featured also PCI-e x2)
* 1x NVMe modules Slot M.2 Socket 3 Key M 2280 (PCI-e x4 Gen 3 interface)
* 1x SATA III 6Gbit/s standard connector
* Networking:
* 1x Gigabit Ethernet LAN interface
* 1x M.2 Key E slot for optional Wireless(WiFi+BT) combo module
* Audio interfaces:
* HD Audio Codec Realtek ALC888S
* Microphone + Headphone Combo Connector (TRRS)
* Pre-amplified stereo Speaker Connectors (up to 3W)
* Digital Optical audio S/PDIF and analog stereo output combo jack 3.5mm connector
* 2x USB 3.0 type-A sockets
* 2x USB Type-C :
* USB 3.1
* DisplayPort Alternate Mode
* Dual Role Port (DRP) USB Power Delivery (USB-PD) 3.0
* Embedded Controller I/O :
* 2x UART ports*
* 2x I2C interface*
* 1x SPI interface*
* 1x Keyboard Scan interface*
* 1x FAN Controller*
* up to 10x GPIO
* Power In:
* 19V DC Power Jack min 3.15A (60W) for basic functionalities - Male connector 4.5mm x 3.0mm with pin inside.
* 2x USB Type-C power in. PD sink profile 20V/3A(60W).
* RTC Battery Connector + RTC Coin Battery
* Bi-color Power Status LED
* Arduino™ Leonardo-Compatible I/O :
* 12x analog inputs*
* up to 23x digital input/output (7 PWM)*
* 1x UART 1x I2C 1x SPI*
* 3x Grove connectors:
* 1x ANALOG INPUT, 1x UART or DIGITAL I/O, 1x I2C or DIGITAL I/O
* Dimensions: 12cm x 12cm - 4.72” x 4.72”
Follow Me On Twitter: https://twitter.com/theetaprime
Follow Me On Instagram: https://www.instagram.com/etaprime/

Equipment I Use:
Screen Capture Device: https://amzn.to/2STpX4C
Tool Kit: https://amzn.to/2M6l9WS
Soldering Station: https://amzn.to/2FtdVeu
Camera: https://amzn.to/2M6KFLB
Tripod: https://amzn.to/2CmdYVY
Raspberry Pi 4: https://amzn.to/3cCrvKb
Flirc Case: https://amzn.to/2OBQTXz

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!

This video and Channel and Video are for viewers 14 years older and up.

THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!

#UDOO #BOLT #RYZEN #ETAPRIME DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video

Видео UDOO BOLT GEAR Review - Ryzen Powered Maker Board канала ETA PRIME