🌅 Sunset Formation - ZCon + Dart XLE + Albabird 🛩🛩🛩

🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
I'm flying the ZCon following a Dart XLE and Albabird from sunset into dusk. Lighting was challenging for the cameras... and the speed envelope of the ZCon in comparison to the other 2 planes was also challenging... but this was as fun as it looks 😎 Big thanks to Sam for the cool 360 footage off his Albabird! 🤘🏻

Flying buddies planes:
-ZOHD Dart XLE ► http://tiny.cc/DartXL
-Albabird ► https://www.finwinghobby.com/goods.php?id=148
-Albabird 360 camera ► http://tiny.cc/Insta360-OneR

☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► http://tiny.cc/BuyAdamGaCoffee

🔵 Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don't make it to YouTube: https://www.facebook.com/AdamGdoesFPV

📷 Follow me on Instagram @adamgdoesfpv ► http://tiny.cc/AdamGonInstagram

Sites I get my awesome FPV goodies from:
✅ Banggood ► http://tiny.cc/BanggoodFPV
✅ RMRC ► http://tiny.cc/RMRC
✅ HobbyKing ► http://tiny.cc/HobbyKing
✅ Gearbest ► http://tiny.cc/GearBestFPV

========ZCon Setup========

Build Log on my FB page here ► http://tiny.cc/ZConBuild

In the Air:
-56" Ritewing ZCon ► Only available if you email Chris at Ritewing directly: ritewing@hotmail.com The ZCon is the same kit as the Recon but with extended wings. You can check out the Recon here: http://tiny.cc/RWRecon
-Matek F765 Flight controller (Running iNav) ► http://tiny.cc/F765
-Badass 2826 1030kv motor ► http://tiny.cc/Badass-2876-1030kv
-Hitec HS225MG Servos ► http://tiny.cc/iiww8y
-Predator 4 FPV cam ► Discontinued. New Favourite FPV cam = http://tiny.cc/Ratel-2 ​
-9x6E APC prop ► http://tiny.cc/9x6APC
-Hobbywing 80a ESC ► http://tiny.cc/80aESC
-Tiny GPS Rx ► http://tiny.cc/220GPS
-1.3ghz Video Transmitter ► http://tiny.cc/kwcv0y
-1.3g Video antenna buried in wing ► http://tiny.cc/SideFeedAntenna
-Dragonlink Micro RX ► http://tiny.cc/DragonLinkRx
-2 x 4,000mAh 5S in parallel ► http://tiny.cc/5S-lipo
-DJI Osmo Action HD camera (4k 30fps with RS on) ► http://tiny.cc/DJIosmoAction
-Sandisk 64gb V30 Micro SD ► UK Link: http://tiny.cc/SanDiskV30UK - USA Link: http://tiny.cc/SanDiskV30USA
-Rear LED's ► http://tiny.cc/Orange12vLED

On me:
-Skyzone OLED FPV Goggles ► http://tiny.cc/Skyzone03O
-Taranis Transmitter ► http://tiny.cc/f6cv0y
-Dragon Link V3 tx ► http://tiny.cc/DragonLinkV3tx
-SRH771 diamond antenna ► USA link: http://amzn.to/2gG50ZU -
UK link: http://amzn.to/2yiHpZo

On my Groundstation:
-K&F Concept Tripod ► 🇺🇸USA Link: http://tiny.cc/GS-Tripod-USA 🇬🇧UK Link: http://tiny.cc/GS-Tripod-UK
-1.3 ghz VAS Pepperbox XTreme antenna ► http://tiny.cc/Pepperbox-XTreme
-Singularity CP Antenna 1.2g ► http://tiny.cc/SingularityCP
-2 x RMRC 1.2ghz VRx ► http://tiny.cc/hbdv0y
-Eachine Diversity Monitor with DVR ► http://tiny.cc/ehfv0y
-Diversity Demon ► http://tiny.cc/ubdv0y
-DVR ► http://tiny.cc/9cdv0y
-Turnigy 5000mAh 3S ► http://tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) ► http://tiny.cc/cedv0y
-Digital Volt Meter ► http://tiny.cc/gfdv0y

========3D Printed Parts========

Matek F765 mount (My design) ► http://tiny.cc/F722orF765mount
Nose to hold FPV cam and DJI cam (My design) ► http://tiny.cc/ZCon3Dnose
Skid ► http://tiny.cc/Skid
Wall mounting hooks designed specifically for this wing (My design) ► http://tiny.cc/ZConWallHook

========3D Printing Equipment========

-3D Printer ► http://tiny.cc/qql96y
-PLA filament ► http://tiny.cc/EryonePLA
-TPU filament ► http://tiny.cc/SainsmartTPU
-PETG filament ► http://tiny.cc/SainsmartPETG
-Digital Calliper ► http://tiny.cc/DigitalCalliper

========Build equipment========

-E6000 glue ► http://tiny.cc/E6000Glue
-Laminating Iron ► http://tiny.cc/LaminatingIron
-Laminate ► http://tiny.cc/laminate
-Hot glue gun ► http://tiny.cc/HotGlueGun
-Foam Cutting Tool ► http://tiny.cc/vxgv0y
-Heat Gun ► http://tiny.cc/AdjustableHeatGun2000w
-Watt Meter ► http://tiny.cc/WattMeter
-3M90 spray adhesive ► http://tiny.cc/3M90adhesive

========Other Video Equipment========

-Macbook Pro ► 🇺🇸 http://tiny.cc/MacbookPro-USA 🇬🇧 http://tiny.cc/MacbookPro-UK
-External Hard to Store Final Cut Pro X projects ► 🇺🇸 http://tiny.cc/Seagate2TB-USA 🇬🇧 http://tiny.cc/Seagate2TB-UK
-Computer Mic ► 🇺🇸 http://tiny.cc/AU-GM30-Mic-USA
-DSLR ► 🇺🇸 http://tiny.cc/CanonDSLR-USA 🇬🇧 http://tiny.cc/CanonDSLR-UK
-Camera Lens ► 🇺🇸 http://tiny.cc/Canon50mmLens-USA 🇬🇧 http://tiny.cc/Canon50mmLens-UK
-Handheld Gimbal for DJI Osmo or GoPro ► http://tiny.cc/Handheld-Gimbal

Видео 🌅 Sunset Formation - ZCon + Dart XLE + Albabird 🛩🛩🛩 канала Adam G does FPV