DIY初心者がテーブルをアンティーク風に加工してみた table makeover
kimimaroです!
ご視聴いただきありがとうございます。
この動画が気に入っていただけたら、ぜひチャンネル登録よろしくお願いします!
https://www.youtube.com/channel/UCwfbjY_xekoK18-YpWS-5qg?sub_confirmation=1
SNSもやっています。
お気軽にフォローしてください!
[Instagram]
https://www.instagram.com/kimimaro0802
[twitter]
https://twitter.com/kimimaro0802
===========================================
「DIY初心者がテーブルをアンティーク風に加工してみた」
#tDIY #アンティーク加工 #シャビー加工 #ヴィンテージ加工 #テーブルリメイク #リメイク
テーブルの天板をアンティーク加工してみました!
ホームセンターで杉の板を3枚購入。
杉の板は傷がつきやすいらしいのですが、今回は傷も風合いになるアンティーク加工したいので、あえてこれをチョイス。
#240のサンドペーパーで板の表面のささくれを整えます。
辺や角もヤスリがけして綺麗にしていきます。
釘を天板の上に撒いてカナヅチで打ち付けて傷をつけます。
スパナやカナヅチでも傷をつけます。
このやり方はCAINZさんの動画(https://youtu.be/dUYPvf529hk)も参考になります。
こうすることで天板の表面に不規則な傷がついて、アンティーク感が高まります。
表面のゴミを掃除機で吸い取り、固く絞ったウェス(布)で表面を拭きます。
塗料は、和信ペイント 水性ウレタンニスのエボニーを選択。
ツヤ消しニスなので、落ち着いたブラックになります。
刷毛でムラが出ないように一気に塗ります。
塗り方は和信ペイントさんの動画を参考にしました。(https://youtu.be/pJdNrkDL9xs)
90分ほど乾燥させます。
1度塗りでしっかり色が入ったので、2度塗りはしませんでした。
最後に#400のサンドペーパーで表面をならして完成!
I tried antique processing of the table top!
Purchase 3 cedar boards at the home improvement center.
The cedar board seems to be easy to get scratched, but this time I want to make an antique processing that will also make the scratch feel, so I chose this.
Use a # 240 sandpaper to trim the surface of the board.
I am going to clean the sides and corners as well.
I nail a nail on a baking sheet and strike it with a punch and scratch it.
I damage it with a spanner or kanauchi.
This method is also helpful for CAINZ's video (https://youtu.be/dUYPvf529hk).
By doing this, the surface of the top plate gets scratched irregularly, and the antique feeling increases.
Vacuum the dirt on the surface with a vacuum cleaner and wipe the surface with a squeezed cloth (cloth).
For paint, select an ebony with Washin Paint Water-based urethane varnish.
Because it is a matte varnish, it becomes calm black.
Apply at a stretch so that unevenness does not come out with a brush.
How to paint was based on the video of Kazunobu paint. (https://youtu.be/pJdNrkDL9xs)
Let dry for about 90 minutes.
I did not paint twice because the color was entered once and firmly.
Finally finish the surface with # 400 sandpaper and complete!
===========================================
[使用機材]
FUJIFILM X-T20
https://amzn.to/2xBZO1i
FUJIFILM 単焦点標準レンズ XF35mm F2 R
https://amzn.to/2S2Uttc
GoPro HERO7 Black
https://amzn.to/2S5rxAH
JOBY ゴリラポッド 1Kスタンド
https://amzn.to/2S0gwAN
AGPTEK Z02 クリップマイク
https://amzn.to/2JnzJbu
[編集環境]
MacBook Pro 13インチ
2.8GHz クアッドコア Intel Core i7 メモリ16GB SSD256GB
https://amzn.to/2YBbFbE
※Apple BTOにてIntel Core i7にスペックアップ
[編集ソフト]
Adobe Premiere Pro CC
Adobe Photoshop Pro CC
Adobe Lightroom CC
[BGM]
Epidemic Soundのロイヤリティフリー楽曲を使用させていただいております。
https://www.epidemicsound.com/referral/343daz/
※Amazonアソシエイトリンクを使用しております
===========================================
[お問い合わせ先]
kmmr0802@gmail.com
===========================================
Hi!
I'm kimimaro!
Thank you for watching.
If you like this video, please subscribe!
https://www.youtube.com/channel/UCwfbjY_xekoK18-YpWS-5qg?sub_confirmation=1
My SNS account is here.
Please follow me!
[Instagram]
https://www.instagram.com/kimimaro0802
[twitter]
https://twitter.com/kimimaro0802
===========================================
My gear
[Main camera]
SONY α6600
SIGMA 16mm F1.4
[microphone]
TASCAM DR-10L
[Editing environments]
MacBook Pro 13inch
2.8GHz Quadcore Intel Core i7 memory 16GB SDD 256GB
[Editing Applications]
Adobe Premiere Pro CC
Adobe Photoshop Pro CC
Adobe Lightroom CC
[BGM]
Epidemic Sound
https://www.epidemicsound.com/referral/343daz/
===========================================
[Contact]
kmmr0802@gmail.com
Видео DIY初心者がテーブルをアンティーク風に加工してみた table makeover канала kimimaro
ご視聴いただきありがとうございます。
この動画が気に入っていただけたら、ぜひチャンネル登録よろしくお願いします!
https://www.youtube.com/channel/UCwfbjY_xekoK18-YpWS-5qg?sub_confirmation=1
SNSもやっています。
お気軽にフォローしてください!
[Instagram]
https://www.instagram.com/kimimaro0802
[twitter]
https://twitter.com/kimimaro0802
===========================================
「DIY初心者がテーブルをアンティーク風に加工してみた」
#tDIY #アンティーク加工 #シャビー加工 #ヴィンテージ加工 #テーブルリメイク #リメイク
テーブルの天板をアンティーク加工してみました!
ホームセンターで杉の板を3枚購入。
杉の板は傷がつきやすいらしいのですが、今回は傷も風合いになるアンティーク加工したいので、あえてこれをチョイス。
#240のサンドペーパーで板の表面のささくれを整えます。
辺や角もヤスリがけして綺麗にしていきます。
釘を天板の上に撒いてカナヅチで打ち付けて傷をつけます。
スパナやカナヅチでも傷をつけます。
このやり方はCAINZさんの動画(https://youtu.be/dUYPvf529hk)も参考になります。
こうすることで天板の表面に不規則な傷がついて、アンティーク感が高まります。
表面のゴミを掃除機で吸い取り、固く絞ったウェス(布)で表面を拭きます。
塗料は、和信ペイント 水性ウレタンニスのエボニーを選択。
ツヤ消しニスなので、落ち着いたブラックになります。
刷毛でムラが出ないように一気に塗ります。
塗り方は和信ペイントさんの動画を参考にしました。(https://youtu.be/pJdNrkDL9xs)
90分ほど乾燥させます。
1度塗りでしっかり色が入ったので、2度塗りはしませんでした。
最後に#400のサンドペーパーで表面をならして完成!
I tried antique processing of the table top!
Purchase 3 cedar boards at the home improvement center.
The cedar board seems to be easy to get scratched, but this time I want to make an antique processing that will also make the scratch feel, so I chose this.
Use a # 240 sandpaper to trim the surface of the board.
I am going to clean the sides and corners as well.
I nail a nail on a baking sheet and strike it with a punch and scratch it.
I damage it with a spanner or kanauchi.
This method is also helpful for CAINZ's video (https://youtu.be/dUYPvf529hk).
By doing this, the surface of the top plate gets scratched irregularly, and the antique feeling increases.
Vacuum the dirt on the surface with a vacuum cleaner and wipe the surface with a squeezed cloth (cloth).
For paint, select an ebony with Washin Paint Water-based urethane varnish.
Because it is a matte varnish, it becomes calm black.
Apply at a stretch so that unevenness does not come out with a brush.
How to paint was based on the video of Kazunobu paint. (https://youtu.be/pJdNrkDL9xs)
Let dry for about 90 minutes.
I did not paint twice because the color was entered once and firmly.
Finally finish the surface with # 400 sandpaper and complete!
===========================================
[使用機材]
FUJIFILM X-T20
https://amzn.to/2xBZO1i
FUJIFILM 単焦点標準レンズ XF35mm F2 R
https://amzn.to/2S2Uttc
GoPro HERO7 Black
https://amzn.to/2S5rxAH
JOBY ゴリラポッド 1Kスタンド
https://amzn.to/2S0gwAN
AGPTEK Z02 クリップマイク
https://amzn.to/2JnzJbu
[編集環境]
MacBook Pro 13インチ
2.8GHz クアッドコア Intel Core i7 メモリ16GB SSD256GB
https://amzn.to/2YBbFbE
※Apple BTOにてIntel Core i7にスペックアップ
[編集ソフト]
Adobe Premiere Pro CC
Adobe Photoshop Pro CC
Adobe Lightroom CC
[BGM]
Epidemic Soundのロイヤリティフリー楽曲を使用させていただいております。
https://www.epidemicsound.com/referral/343daz/
※Amazonアソシエイトリンクを使用しております
===========================================
[お問い合わせ先]
kmmr0802@gmail.com
===========================================
Hi!
I'm kimimaro!
Thank you for watching.
If you like this video, please subscribe!
https://www.youtube.com/channel/UCwfbjY_xekoK18-YpWS-5qg?sub_confirmation=1
My SNS account is here.
Please follow me!
[Instagram]
https://www.instagram.com/kimimaro0802
[twitter]
https://twitter.com/kimimaro0802
===========================================
My gear
[Main camera]
SONY α6600
SIGMA 16mm F1.4
[microphone]
TASCAM DR-10L
[Editing environments]
MacBook Pro 13inch
2.8GHz Quadcore Intel Core i7 memory 16GB SDD 256GB
[Editing Applications]
Adobe Premiere Pro CC
Adobe Photoshop Pro CC
Adobe Lightroom CC
[BGM]
Epidemic Sound
https://www.epidemicsound.com/referral/343daz/
===========================================
[Contact]
kmmr0802@gmail.com
Видео DIY初心者がテーブルをアンティーク風に加工してみた table makeover канала kimimaro
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
端材で作る「ローテーブル」ネジは1本も使いません。SUB)【ブライワックス】無印良品の木の棚を古材とアイアンでできた男前インテリアに変身させる!【アイアンペイント】【色比較DIY】オイルステイン全色比較してみた!-OilStain Color Comparison-【テーブルリメイク】ダイニングテーブルをアンティーク風に塗り替え。(手順、コツ)Remake table antique【DIY】ウレタンニス(水性)塗り[徹底解説]塗料好きDIYerが油性塗料と水性塗料の違いをわかりやすく解説します!【色比較DIY】ワトコオイル全色比較してみた!(杉材)-Watoco Oil Color Comparison-SUB)【DIY】足場板古材でカフェのようなテーブルを作る|ダボ継ぎ天板|錆エイジング塗装【男のかっこいい部屋】和信ペイント ニス塗り方ビデオ(全編)DIY PCデスク・机の作り方 (How to make a PC desk)[木工DIY] 自分好みのローテーブルを作った! Low Table DIY !DIY|木の質感をそのまま残すガラス塗料の塗り方(tatara撥水セラミックマルチ) RESTA【DIY】足場板をブライワックスで仕上げてテーブルを作成!Make a modern low table DIY#13[DIY]980円のカラーボックスを男前なヴィンテージロッカーにリメイクしてみた!【DIY】無垢材の天板 シンプルなローテーブル diy simple coffee table【DIY】テーブルリメイク!一瞬で削れるマシーンが凄すぎた…プロ直伝!BRIWAXの塗り方 part1【DIY】| 白石木工3千円で安く簡単に高級ローテーブルをdiy! It's inexpensive by 3000 yen and luxury easily, a low table, diy!【DIY】木工塗装をめちゃくちゃキレイに仕上げるコツクランプを持ってない人へクランプを使わずにDIY用の板を作る!これができればテーブルでも棚でも自由自在!木工