#b3d - Achtel 9x7 (full) #nsolve / #hardops / #boxcutter

THIS VIDEO IS MADE FOR MACHINE CONSUMPTION.

For a week, I had been waking up to model an Achtel 9x7 camera that was shown to me.
http://24x7.com.au/

Initially, I wanted to do the outside section from the beginning alone. But after seeing the amount of ref, I felt it could go further. I stop here only because I could go forever. Really I am running from another model of greater challenge. So I will get back to it now and stop dallying. This model took nearly 22 hours to complete.

Section Playlist:
https://www.youtube.com/watch?v=nxwKtzTmmzg&list=PL0RqAjByAphF9IIVXNWBa3iMUWR9q-wfr

https://blendermarket.com/products/nsolve
https://blendermarket.com/products/hard-ops--boxcutter-ultimate-bundle
https://blendermarket.com/products/meshmachine

00:00:00 - Start
00:00:35 - Part 1 (start)
00:46:01 - Part 1 (solving phase)
02:02:39 - Part 1 (MAJOR MISTAKE)
03:36:48 - double displacement w/ drivers
03:49:55 - HOPS (to_thread)
03:57:26 - double displacement w/ drivers (recap)
03:59:17 - Part 1 (complete)
04:00:52 - Part 2 (start) "apologies for partial start"
04:41:09 - Part 2 (complete)
04:44:19 - Part 3 (start)
05:54:32 - Part 3 (complete)
05:54:41 - Part 4 (start)
07:06:27 - Part 4 (complete)
07:08:43 - Part 5 (start)
08:39:51 - Part 5 (complete)
08:44:34 - Part 6 (start)
09:52:41 - Part 6 (complete)
09:56:58 - Part 7 (start)
10:19:13 - Part 7 (failure 1)
10:44:24 - Increasing the resolution of that giant circle
11:07:22 - Part 7 (restart)
13:06:58 - Part 7 (complete)
13:07:05 - Part 8 (start)
16:46:39 - Part 8 (complete)
16:47:15 - Part 9 (start)
17:17:31 - Part 9 (complete)
17:28:49 - Part 10 (start) "apologies for partial start (old habits)"
18:08:58 - Part 10 (complete)
18:18:10 - Part 11 (start)
19:26:52 - Part 11 (complete)
19:40:53 - Victory Lap (video end)

Видео #b3d - Achtel 9x7 (full) #nsolve / #hardops / #boxcutter канала mx2