2011 - 2014 Chevrolet Cruze GM Factory Fog Lights Option Unboxing & Installation (with Bumper on!)
This video describes installation of the GM factory original front fascia / bumper cover mounted fog lights accessory option kit 95248415 for 2011 2012 2013 and 2014 first generation Chevrolet Cruze models, without removing the fascia / bumper cover. The old part numbers for this same kit was GM 95469569 and before that 95903470 and 96983696 (all three discontinued and replaced by 95248415 which is itself now discontinued by GM).
This particular Chevy option is fairly easy to add, and I will show an abbreviated approach where you do not need to remove the bumper cover / fascia or headlights nor even raise the vehicle to complete the install. It will be a tight fit in many cases though! The vehicle illustrated is a 2012 Cruze ECO, but the procedure is the same for all first generation models.
Depending on when your vehicle was manufactured by GM, you may have to take it into the Chevrolet dealer to complete the installation. Cruze models manufactured between start of production on May 6th, 2009 and thru March 25, 2013 will require the body control module (BCM) to have the fog light option enabled in the flash settings at your local GM Chevrolet dealer. Only a GM dealer has the necessary service tool to perform this step. These vehicles are too new for the venerable GM Tech2 scan tool, and would not be supported by that nor any similar third party scan tools. You would need access to the Multiple Diagnostic Interface (MDI) or MDI2 tool for this procedure, if applicable for your BCM.
NOTE: Cruze models built AFTER March 25th, 2013 do NOT require any additional dealer scan tool BCM configuration for the fog light option to function. It should just work, the same as the 2012 ECO shown in this video does (though it was obviously made prior to that date from GM so take their cutoff date with a grain of salt as it's obviously off a tad).
WARNING: The GM kit described in this video is ONLY designed for use on the Chevrolet Cruze. Other GM vehicles are electrically and mechanically incompatible.
Here's an affiliate link to check if any of these discontinued GM part numbers 95248415 95169824 95169825 11609458 96950676 94580498 94831151 94831152 13295227 95469569 95903470 are on eBay: https://ebay.us/nN1fR1
And if I've saved you some $$ here, consider some coins for the coffee tip-jar! https://ko-fi.com/drshock
Chapters:
0:00 - Procedure overview
0:20 - Kit unboxing
2:52 - Disconnect battery
3:09 - Electrical fuse housing disassembly
6:26 - Headlight switch removal
7:00 - Upgrade foglight switch installation
7:28 - Wiring harness installation
13:22 - Wiring harness routing
13:45 - Trim removal for access
22:46 - RH bumper capsule cover removal
25:36 - RH fog light installation
31:14 - LH bumper capsule cover removal
32:19 - Ambient air sensor transfer
33:42 - LH fog light installation
35:01 - Additional wiring harness routing
37:36 - Reconnect battery
38:18 - Demonstration
#drshock #cruze
Disclaimer: DrShock, the alias for the human content creator for this YouTube channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any other, vehicle whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle.
Видео 2011 - 2014 Chevrolet Cruze GM Factory Fog Lights Option Unboxing & Installation (with Bumper on!) канала DrShock
This particular Chevy option is fairly easy to add, and I will show an abbreviated approach where you do not need to remove the bumper cover / fascia or headlights nor even raise the vehicle to complete the install. It will be a tight fit in many cases though! The vehicle illustrated is a 2012 Cruze ECO, but the procedure is the same for all first generation models.
Depending on when your vehicle was manufactured by GM, you may have to take it into the Chevrolet dealer to complete the installation. Cruze models manufactured between start of production on May 6th, 2009 and thru March 25, 2013 will require the body control module (BCM) to have the fog light option enabled in the flash settings at your local GM Chevrolet dealer. Only a GM dealer has the necessary service tool to perform this step. These vehicles are too new for the venerable GM Tech2 scan tool, and would not be supported by that nor any similar third party scan tools. You would need access to the Multiple Diagnostic Interface (MDI) or MDI2 tool for this procedure, if applicable for your BCM.
NOTE: Cruze models built AFTER March 25th, 2013 do NOT require any additional dealer scan tool BCM configuration for the fog light option to function. It should just work, the same as the 2012 ECO shown in this video does (though it was obviously made prior to that date from GM so take their cutoff date with a grain of salt as it's obviously off a tad).
WARNING: The GM kit described in this video is ONLY designed for use on the Chevrolet Cruze. Other GM vehicles are electrically and mechanically incompatible.
Here's an affiliate link to check if any of these discontinued GM part numbers 95248415 95169824 95169825 11609458 96950676 94580498 94831151 94831152 13295227 95469569 95903470 are on eBay: https://ebay.us/nN1fR1
And if I've saved you some $$ here, consider some coins for the coffee tip-jar! https://ko-fi.com/drshock
Chapters:
0:00 - Procedure overview
0:20 - Kit unboxing
2:52 - Disconnect battery
3:09 - Electrical fuse housing disassembly
6:26 - Headlight switch removal
7:00 - Upgrade foglight switch installation
7:28 - Wiring harness installation
13:22 - Wiring harness routing
13:45 - Trim removal for access
22:46 - RH bumper capsule cover removal
25:36 - RH fog light installation
31:14 - LH bumper capsule cover removal
32:19 - Ambient air sensor transfer
33:42 - LH fog light installation
35:01 - Additional wiring harness routing
37:36 - Reconnect battery
38:18 - Demonstration
#drshock #cruze
Disclaimer: DrShock, the alias for the human content creator for this YouTube channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any other, vehicle whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle.
Видео 2011 - 2014 Chevrolet Cruze GM Factory Fog Lights Option Unboxing & Installation (with Bumper on!) канала DrShock
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![2012 - 2016 Chevrolet Sonic GM Factory Fog Lights Option Unboxing, Installation & BCM Programming](https://i.ytimg.com/vi/_aO4vyqacn4/default.jpg)
![Chevy Cruze full car stereo teardown upgrade](https://i.ytimg.com/vi/MdJgjYix5Kg/default.jpg)
![Top 5 Problems: Chevy Cruze Sedan 2008-16 1st Gen](https://i.ytimg.com/vi/J2CGIC-vS7M/default.jpg)
![Chevrolet Cruze | What Wheels Fit](https://i.ytimg.com/vi/N9r9wvJeuQU/default.jpg)
![SPECDTUNING INSTALLATION VIDEO: 2011-2015 CHEVY CRUZE PROJECTOR HEADLIGHTS](https://i.ytimg.com/vi/irtXRgLrI2Y/default.jpg)
![2011 - 2015 Chevy Cruze Kicker Amplifier and Subwoofer Install](https://i.ytimg.com/vi/qi4pK93qzak/default.jpg)
![POV DIY How To Wrap Over Chrome Trim - Pre-Tucking Trick / Technique](https://i.ytimg.com/vi/qGXpFaoC0WA/default.jpg)
![](https://i.ytimg.com/vi/-V3utkr-jig/default.jpg)
![Installing the $113 eBay Turbo on the Chevy Cruze 1.8 Daily Driver Part 1](https://i.ytimg.com/vi/HUY_IJCo_8o/default.jpg)
![Infidini Asottu how to install Chevrolet Cruze car dvd](https://i.ytimg.com/vi/NMEuACZIvQg/default.jpg)
![2011-2015 Chevy Cruze Front Rotor and Pads](https://i.ytimg.com/vi/pzmbukNK8U0/default.jpg)
![2011 - 2014 Chevrolet Cruze Trunk Release Switch Repair (or License Lamp Replacement)](https://i.ytimg.com/vi/vYfnAnMtpyM/default.jpg)
![Painting - Spot Panel Repair](https://i.ytimg.com/vi/7wrUrspj_YA/default.jpg)
![Chevy Cruze Fog Light Install - Bumper On](https://i.ytimg.com/vi/fBClQnVgha0/default.jpg)
![Cruze Coilover Installation Guide| In Depth Installation](https://i.ytimg.com/vi/-92GTTa9I4M/default.jpg)
![How to Install Fog Lights NBS Sierra and Silverado](https://i.ytimg.com/vi/0L3NiS-9Auk/default.jpg)
![Chevrolet Chevy Cruze Front Bumper Cover Removal And Installation (2012 - 2014)](https://i.ytimg.com/vi/yckJz_Gs16Q/default.jpg)
![How to Aim and Align Your Headlights](https://i.ytimg.com/vi/OIow5YgdRro/default.jpg)
![Chevy Cruze LED Headlight Kit Install!](https://i.ytimg.com/vi/7JD_v7O0B2U/default.jpg)
![CHEVROLET CRUZE FRONT BUMPER REMOVAL REPLACEMENT. CHEVY CRUZE](https://i.ytimg.com/vi/9bX3ac0pUqM/default.jpg)