Hardwire Dash Cam Installation on my Toyota RAV4 Prime 2021 - VIOFO A129 DUO

Here's how I installed a dual dash cam on my Toyota RAV4 Prime 2021. I used the VIOFO A129 Duo for this installation and these instructions can also be applied for any recent RAV4 (5th generation) 2019+

*** For the fuse tap, you'll want to use smaller fuses than the ones I used. Anything under 10A is recommended. Ex: 10A + 5A or 7.5A + 5A or 5A +3A etc.. ***

Chapters :
0:00 Introduction
0:32 Dashcam and tools
2:19 Fuse box slots for fuse tap
3:48 Fuse tap polarity
4:30 Fuse tap installation
5:51 Hardwire kit installation
9:14 Front camera installation
14:54 Rear camera installation
21:14 Testing everything
22:37 Dash cam footage
23:26 Ending

Here's the link for the dash cam and SD Card :
- VIOFO A129 Duo : https://www.amazon.ca/gp/product/B07CT6JPYW
- VIOFO Hardwire kit : https://www.amazon.ca/gp/product/B07JQ1JYPJ
- High Endurance Micro SD card : https://www.amazon.ca/gp/product/B07NY23WBG

I highly suggest investing in a good High Endurance Micro SD card as your dashcam will be recording continuously. Here's a review to help you choose one for your dash cam : https://carcamcentral.com/guide/recommended-microsd-cards-for-dash-cameras

Other tools in the video :
1- Plastic pry tool : https://www.amazon.ca/EKIND-No-Scratch-4-in1-Dashboard-Dismantle/dp/B01CS3A32Q
2- Circuit tester : https://www.canadiantire.ca/en/pdp/oemtools-6-and-12-volt-circuit-tester-0250934p.html#srp
3- Fuse tap : https://www.amazon.ca/gp/product/B078T7G1C2

🔔 Subscribe & Enable Notifications:
https://www.youtube.com/c/Bajeenthan?sub_confirmation=1

📺 MY OTHER VIDEOS:
⇒ RAV4 PRIME LED INSTALLATION : https://youtu.be/ee1YPub_sGQ
⇒ RAV4 PRIME DASH CAM INSTALLATION : https://youtu.be/OWL5Um5Wi8s

Видео Hardwire Dash Cam Installation on my Toyota RAV4 Prime 2021 - VIOFO A129 DUO канала R4Primer