Dodge Ram 4x4 Control Arm Removal/Installation and Bushing Replacement! - DETAILED

This is a very detailed guide on how to remove all 4 of your control arms, as well as replacing the bushings. This applies for most Dodge Ram 4x4's, as well as many other vehicles that have a straight axle. The vehicle in the video is a 1998 Dodge Ram 2500 with the 12 valve Cummins.

This job is fairly difficult, just because most of the bolts are seized up in the bushings, forcing you to have to cut them out.

When I was going to start this project, I noticed that there wasn't a lot of information on this job, which surprised me because these bushings can cause many driving problems if not replaced.

If your bushings look cracked at all, it might be time to replace!

The before/after ride was a big difference! The vehicle wandered wayyy less, especially when going over bumps in the road!

Hopefully this help! If you like this video please comment, like, and subscribe for more tutorials!

Disclaimer:
I AM NOT A PROFESSIONAL
Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Jake.

Видео Dodge Ram 4x4 Control Arm Removal/Installation and Bushing Replacement! - DETAILED канала Jake