Open.HD Build project - Connecting everything together on the bench
In my introduction to Open.HD I described what it was and what I'd bought to build my project. In this video, I put together the components and get it running on the bench. Connecting up the basic video, as well as flight controller telemetry and the RC control signal.
You can find out lots more useful things for Open.HD in their project page https://github.com/OpenHD/Open.HD (and in fact since I've put this video together, version 2.0 has been released) There's is lots of great stuff on the wiki pages https://github.com/OpenHD/Open.HD/wiki make that your first port of call if you want to put a system together.
This project isn't part of a review series or sponsored by anyone (although I did get the HGLRC F22 board for free) so a massive thanks to my Patreon supporters who gave m the resources to buy all the equipment to put videos like this together - thanks guys.
A few people have asked exactly what I'm using and where I got it so I'm adding some links below. These are not affiliate links or anything - they are just intended to give you a reference of exactly what I used. You may be able to get these faster/cheaper/easier from different suppliers closer to you.
Pi 4Bs 2GB version (I have 2) https://thepihut.com/collections/raspberry-pi/products/raspberry-pi-4-model-b
Pi Zero WH (as an alternative Air Pi) https://thepihut.com/collections/raspberry-pi/products/raspberry-pi-zero-wh-with-pre-soldered-header
7" Touch screen https://thepihut.com/collections/raspberry-pi-screens/products/official-raspberry-pi-7-touchscreen-display
Case for the touchscreen https://thepihut.com/products/raspberry-pi-official-7-touchscreen-case
ZeroCam FishEye (I have 2 of these) https://thepihut.com/collections/raspberry-pi-camera/products/zerocam-fisheye-camera-for-raspberry-pi-zero
Adapter to use the Zero cam on the Pi4
https://thepihut.com/collections/raspberry-pi-camera/products/zerocam-adapter-for-raspberry-pi-3-3-2-b-a
ASUS AC56 Wifi dongle (2 of) https://www.ebuyer.com/741447-asus-usb-ac56-network-adapter-usb-ac56
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
Видео Open.HD Build project - Connecting everything together on the bench канала CurryKitten
You can find out lots more useful things for Open.HD in their project page https://github.com/OpenHD/Open.HD (and in fact since I've put this video together, version 2.0 has been released) There's is lots of great stuff on the wiki pages https://github.com/OpenHD/Open.HD/wiki make that your first port of call if you want to put a system together.
This project isn't part of a review series or sponsored by anyone (although I did get the HGLRC F22 board for free) so a massive thanks to my Patreon supporters who gave m the resources to buy all the equipment to put videos like this together - thanks guys.
A few people have asked exactly what I'm using and where I got it so I'm adding some links below. These are not affiliate links or anything - they are just intended to give you a reference of exactly what I used. You may be able to get these faster/cheaper/easier from different suppliers closer to you.
Pi 4Bs 2GB version (I have 2) https://thepihut.com/collections/raspberry-pi/products/raspberry-pi-4-model-b
Pi Zero WH (as an alternative Air Pi) https://thepihut.com/collections/raspberry-pi/products/raspberry-pi-zero-wh-with-pre-soldered-header
7" Touch screen https://thepihut.com/collections/raspberry-pi-screens/products/official-raspberry-pi-7-touchscreen-display
Case for the touchscreen https://thepihut.com/products/raspberry-pi-official-7-touchscreen-case
ZeroCam FishEye (I have 2 of these) https://thepihut.com/collections/raspberry-pi-camera/products/zerocam-fisheye-camera-for-raspberry-pi-zero
Adapter to use the Zero cam on the Pi4
https://thepihut.com/collections/raspberry-pi-camera/products/zerocam-adapter-for-raspberry-pi-3-3-2-b-a
ASUS AC56 Wifi dongle (2 of) https://www.ebuyer.com/741447-asus-usb-ac56-network-adapter-usb-ac56
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/
Видео Open.HD Build project - Connecting everything together on the bench канала CurryKitten
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Introduction to Open.HD - a new build project](https://i.ytimg.com/vi/SUSnyXYmgRc/default.jpg)
![URUAV 1S multi charger (and a few alternatives) supplied by Banggood](https://i.ytimg.com/vi/ejkqJeIfzZI/default.jpg)
![Raspberry Pi 4 8GB & USB Boot](https://i.ytimg.com/vi/2zrwjGcyM5s/default.jpg)
![This BNF 4" Long Range Drone Flies for 18 minutes!](https://i.ytimg.com/vi/khL2Rxu2OD0/default.jpg)
![The ViFly ShortSaver - this could stop your new build going up in (magic) smoke! Supplied by ViFly](https://i.ytimg.com/vi/iuYWe1JCQss/default.jpg)
![RushFPV Tank II Ultimate VTX (+ add-on Mic) Supplied by RushFPV](https://i.ytimg.com/vi/8CALRYcmvOg/default.jpg)
![Digital HD FPV On A Budget!: Part 2 - IT DOES JUST WORK (First Try) (DJI FPV Experience Alternative)](https://i.ytimg.com/vi/FAmTJRY3dpY/default.jpg)
![Eachine LAL3. A 3" HD capable racer. Supplied by Banggood](https://i.ytimg.com/vi/X_6HHNekfrA/default.jpg)
![Geelang Anger 75X V2 4S Whoop (!) Supplied by Banggood](https://i.ytimg.com/vi/79xSwmxP2NM/default.jpg)
![Raspberry Pi Projects 2020](https://i.ytimg.com/vi/ZDfhcA0SCiM/default.jpg)
![HTRC T400 Pro Duo Charger. Supplied by Banggood](https://i.ytimg.com/vi/x6LZr-B7vRo/default.jpg)
![Awesome HGLRC Giveaway - win all this stuff !](https://i.ytimg.com/vi/glSvILVdhJA/default.jpg)
![AKK Dual antenna VTX - Will it work? Supplied by AkkTech](https://i.ytimg.com/vi/Ud0zzUbUMWE/default.jpg)
![FatShark Bytefrost Digital HD system. Part 2: Flight tests and Conclusions](https://i.ytimg.com/vi/UDR2lK61ZD0/default.jpg)
![Sequre SQ-001 soldering iron - awesome and affordable! Supplied by Sequre](https://i.ytimg.com/vi/Tigr0v6VuL4/default.jpg)
![The New Raspberry Pi HQ Camera Is Awesome! - Set Up And Testing](https://i.ytimg.com/vi/VDWORgW31Sw/default.jpg)
![The Caddx Ratel. Is this the best FPV camera available? Supplied by Banggood](https://i.ytimg.com/vi/JRkDRUeLHU8/default.jpg)
![MalDuino: How It's Made](https://i.ytimg.com/vi/856D92qWpYo/default.jpg)
![Eachine Cvatar Cinewhoop - it's good! Supplied by Banggood](https://i.ytimg.com/vi/88JCG3Bhuik/default.jpg)