Re, Convection Coefficient and Nusselt No. Calculations in ANSYS Fluent
This tutorial was about fluid flow within a circular tube; you will learn in this video:
1- How to make a special mesh for the case considered.
2-How to set up ansys fluent for required calculations.
3- How to calculate Reynolds number, convection coefficient and Nusselt number.
- - - - - - - - - - - - - - - - - - - - - - - -
The expressions appeared in the tutorial were listed below:
Re=(997 [kg/m^3]*0.05 [m]*areaAve(Velocity)@inlet )/0.000891 [kg/m/s]
h=areaAve(Surface Heat Transfer Coefficient)@fully_developed
Nu=(h *0.05 [m])/(0.607 [W/m/K])
- - - - - - - - - - - - - - - - - - - - - - - -
Also; to download the geometry file, please click on the following link:
https://drive.google.com/file/d/1Q8XvpALnYRsg2iUuiQA8JIVYvWWvrfdO/view?usp=sharing
Видео Re, Convection Coefficient and Nusselt No. Calculations in ANSYS Fluent канала Saud T. Al Jadir
1- How to make a special mesh for the case considered.
2-How to set up ansys fluent for required calculations.
3- How to calculate Reynolds number, convection coefficient and Nusselt number.
- - - - - - - - - - - - - - - - - - - - - - - -
The expressions appeared in the tutorial were listed below:
Re=(997 [kg/m^3]*0.05 [m]*areaAve(Velocity)@inlet )/0.000891 [kg/m/s]
h=areaAve(Surface Heat Transfer Coefficient)@fully_developed
Nu=(h *0.05 [m])/(0.607 [W/m/K])
- - - - - - - - - - - - - - - - - - - - - - - -
Also; to download the geometry file, please click on the following link:
https://drive.google.com/file/d/1Q8XvpALnYRsg2iUuiQA8JIVYvWWvrfdO/view?usp=sharing
Видео Re, Convection Coefficient and Nusselt No. Calculations in ANSYS Fluent канала Saud T. Al Jadir
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Validation of Nusselt Number (Nu) for Pipe Flow | Ansys Fluent[CFD] Heat Transfer Coefficient (htc) in ANSYS Fluent, OpenFOAM and CFXNusselt Number VariationHow to get Re, h, Nu in Ansys #cfd #fluentANSYS Fluent Tutorial: Natural Convection Heat Transfer 2D Transient Analysis on a Solid CylinderSimulation écoulement laminaire entre deux plaque plane(écoulement de poiseuille ) ANSYS 15Estimation of Boundary Layer Thickness and H.T. Convection Coefficient by ANSYS FluentANSYS CFD Tutorials | Nusselt Number Calculation in ANSYS Fluent | Convection Heat TransferCFD Counter Flow Heat Exchanger | SolidWorks 2020 |Laminar Fully Developed Flow in PipesNusselt number FluentGrid Independence Test in Ansys Fluent | Mesh Quality Inspection | Grid Independence Study |Thermal Analysis of Monocrystalline Solar Cell - ANSYSANSYS Fluent Tutorials | Flow in Between Rotating Cylinders | ANSYS Fluent Rotating CylinderCFD Fluent tutorial - Non Newtonian fluid transient simulationANSYS Fluent Tutorial | Convective Heat Transfer From a Heat Source | Source Term Modeling |ANSYSR19ANSYS Fluent Tutorial | Heat Transfer Analysis | Surface Nusselt Number | Skin Friction CoefficientANSYS Tutorial:CFD Analysis of Double Pipe Counter Flow Heat ExchangerHarmonic Response of Fixed-Fixed Beam | ANSYS WORKBENCH TutorialTransient Multiphase Flow Simulation using Eulerian Granular Multiphase Model in ANSYS Fluent | #11