4 speed EV ninja Electric motorcycle part 1

building a 4 speed electric motorcycle in 1 week!!!!! goal 200 miles of range and 90 mph top speed able too cruise at 75

I only sell this $880 Motor, transmission, apt72400 controller, key and throttle all come in the kit.

But these are the other components you need all of which i sourced on ebay for these prices

$150 Dc to dc converter i got off ebay

$65 chain 520

$35 Front sproket

$ 10 for 2 turn signal relays ( to make toturn signals blink!

? Cost of led lights

$6 volt reader

$250 for the bms ( off ebay 20s 200amp)

$ 200 bucks for wiring .

1200-1500 for 10 nissan leaf cells (easiest way to go , my pack was 3000 and i built it out of 500 21700 cells) this should get you about 50-75 miles , the set up i have does about 200 , if you have the space you could fit 20 leaf cells and get 100-150 miles of range depends on how much room you have.

Plus 200 for wire and fuses

Your at 3000 bucks

About 20 hours in fab work for a battery box and possible other small welding jobs if you have to pay some one at 60 an hour is 1200

So your at 4200 and there is an 800 dollar buffer for the unknown stuff that comes up

So if you weld or fave some one to weld for free you can do it under 4000

Hope this helps , let me know if you want one

Marlio

Also please share my videos and help
Me to het more subscribers so i can put out more content

E mail me at marlioescobar1@gmail.com

Видео 4 speed EV ninja Electric motorcycle part 1 канала Diy Guy