2x6 box joints cut by a computer controlled router (ShopBot Handibot portable CNC)
I finally setup and successfully cut a box joint in 2x6 board's using a Handibot CNC and DeWalt router. The box joint (also called finger joint) is one of my favorites, and I think rivals dovetails when glued. I'd like to try lap joints, mortise and tenon (including loose tenon), and some miter variations.
Now that I've got the joint worked out I can use it for workbench legs and shelf brackets.
I hope you enjoy! Please subscribe if you haven't already.
Видео 2x6 box joints cut by a computer controlled router (ShopBot Handibot portable CNC) канала Studio85
Now that I've got the joint worked out I can use it for workbench legs and shelf brackets.
I hope you enjoy! Please subscribe if you haven't already.
Видео 2x6 box joints cut by a computer controlled router (ShopBot Handibot portable CNC) канала Studio85
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![3d printing gears on Prusa Mini Plus (actual speed)](https://i.ytimg.com/vi/b_o1INil7AI/default.jpg)
![Cutting diy door clamping jigs with the Handibot CNC router](https://i.ytimg.com/vi/aZnRNUl8bwk/default.jpg)
![pump case version 3 is currently on the prusa mini plus #peristalticpump #3dprinting](https://i.ytimg.com/vi/hsw17_G2y6I/default.jpg)
![DIY linear slide v0.1 test, 3D printed (PETG) slider and end blocks](https://i.ytimg.com/vi/_mow4EhpvzY/default.jpg)
![another pump design failure to learn from #3dprinting #peristalticpump](https://i.ytimg.com/vi/ZfgqRj9RxAg/default.jpg)
![Habit tracker prototype 3d printed on a Prusa Mini Plus running MicroPython on a Raspberry Pi Pico](https://i.ytimg.com/vi/cGyoUVwb-mQ/default.jpg)
![first look and 3d printed parts fitting the camera slider prototype, parts made on Prusa Mini Plus](https://i.ytimg.com/vi/BUVqIX3Xvco/default.jpg)
![Suggestions for version 2 of the DIY peristaltic pump?](https://i.ytimg.com/vi/B1bzYriWtSg/default.jpg)
![DIY Coin Cell Battery Tester](https://i.ytimg.com/vi/LjWfyBadst0/default.jpg)
![Testing the 3d printed gauge needles with Raspberry Pi Pico connected hobby servos](https://i.ytimg.com/vi/9AqDj94mAkY/default.jpg)
![First attempt 3D Printing gears on Prusa Mini Plus](https://i.ytimg.com/vi/bTmV7JS4E0g/default.jpg)
![building a camera slider: accuracy test](https://i.ytimg.com/vi/3MZgWcAlouA/default.jpg)
![toy birdhouse front #3dprinting #prusamini](https://i.ytimg.com/vi/u318SzkTlDk/default.jpg)
![3D printing next batch of test parts for camera slider build (Prusa Mini Plus)](https://i.ytimg.com/vi/xDXzPYjlQao/default.jpg)
![Some of my geometric constructions](https://i.ytimg.com/vi/ChVlcIq2FCY/default.jpg)
![Watching machines watch machines work while working](https://i.ytimg.com/vi/sPzjWmDDV6w/default.jpg)
![a computer cutting wood box joints (ShopBot Handibot CNC router)](https://i.ytimg.com/vi/zzTXnb7sBno/default.jpg)
![test printing a small 0.5 mod gear using PETG on a Prusa Mini Plus](https://i.ytimg.com/vi/sp0-s5IdPG8/default.jpg)
![The song and dance of servos by Raspberry Pi Pico and the SG92R's](https://i.ytimg.com/vi/naMX49MVpjA/default.jpg)
![first accuracy test of the computer controlled camera slider made with Prusa Mini Plus 3d prints](https://i.ytimg.com/vi/DeMzUpUN_E4/default.jpg)
![boring update](https://i.ytimg.com/vi/yxjEr8Hxw6k/default.jpg)