Harley springt nicht an, Harley don`t start
Trouble: Engine not starting, Starter ok, no troublecode in EFI
Problem: There are no power, 12 volt, on coil or pump.
Measurement: The Pin 4 from the cpu goes to the system relay and grounded from 12 volt to max 6 volt. this is checked with the fluke messuring instrument. The power Pin 13 and the power ground Pin 28 from the EFI are checked with the avl messuring instrument
Diagnostic: The EFI are not grounded the system relay exact to 0 volt
When I ground the pin 4 to battery, then start the engine.
Видео Harley springt nicht an, Harley don`t start канала Zweiradengel
Problem: There are no power, 12 volt, on coil or pump.
Measurement: The Pin 4 from the cpu goes to the system relay and grounded from 12 volt to max 6 volt. this is checked with the fluke messuring instrument. The power Pin 13 and the power ground Pin 28 from the EFI are checked with the avl messuring instrument
Diagnostic: The EFI are not grounded the system relay exact to 0 volt
When I ground the pin 4 to battery, then start the engine.
Видео Harley springt nicht an, Harley don`t start канала Zweiradengel
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Nockenwellenlager Nadellager an Harley MotorenBMW Motorrad ABS Austauschsteuergerät DefektKanalabdruck vom ZylinderkopfHarley Ladespannungsproblem, Batteriespannung zu hochHarley Pinionbuchse Kurbelwellengehäusebuchse wechselnBMW F800ST Lüfterproblem MessvideoOberflächenmessung an S&S Zylinder, Harley Shovel DesignVentilsitzring einschrumpfen an Harley ZylinderkopfZylinderfußflächenbearbeitung an einem Harley MotorHarley TC Vergaser MAP Sensor überprüfen mit PufferspannungVentilsitzring Einschrumpfen mit Stickstoff an Harley ZylinderkopfVakuumbefüllen von Harley HydrosLäppen eines Pinion Lager an einem Harley MotorEigenbau Gabelhilfswerkzeug für BMWNockenwellenlagerbohrungsbearbeitung an einem Harley Motor (STD)JMP Batterietester druckt nicht