How to Make an Ornithopter (Rubber band type)
How to make an ornithopter, a rubber band type flying machine that flies by flapping its wings.
This video was made possible in part by these Patreon supporters:
Jonathan Rieke
James Padden
Juliusz Wojtyga
Support RimstarOrg on Patreon https://www.patreon.com/user?u=680159
or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htm
Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1
Go to the main channel page here https://youtube.com/rimstarorg
Step 0. Introduction 0:00
Step 1. Making the fuselage 0:22
Step 2. The two tubes for the wings to pivot on 0:47
Step 3. Making the tube for the crank and front rubberband hook 1:04
Step 4. Strengthening the front of the fuselage with cotton thread and glue 1:35
Step 5. Making the tail frame 1:43
Step 6. Making the rear motor hook 2:37
Step 7. Attaching the tail and rear motor hook 2:53
Step 8. Making the wing spars 3:03
Step 9. Making the crank and front motor hook 3:41
Step 10. Smoothing the ends of the hooks 4:36
Step 11. Making the connecting rods 4:42
Step 12. Making stoppers 4:55
Step 13. Attaching the wing spars and connecting rods 5:04
Step 14. Different types of tail and wing coverings 5:37
Step 15. Removing the folds in the tissue 5:51
Step 16. Marking and cutting the wing covering 5:59
Step 17. Marking and cutting the tail covering 6:28
Step 18. Attaching the tail and wing coverings 6:30
Step 19. Adding grease/lubrication 6:58
Step 20. Adjusting the tail angle 7:08
Step 21. Using office/household rubberbands 7:14
Step 22. Using special rubber (1/8" tan super sport rubber) 7:26
Step 23. Lubricating the rubber 7:34
Step 24. Winding and attaching the rubber 7:39
Step 25. How to fly it and adjust the tail 8:08
Step 26. Have fun! 8:22
On http://www.ornithopter.org/software.shtml you can find a software tool called FlapDesign for designing the crank, connecting rods and wing spars that helps a lot if you're going to design your own.
See also:
Ornithopter - Rubber Band Wing Flapping Flying Machine
https://www.youtube.com/watch?v=ZvzpsRWl12s&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8h
How Ion Propulsion, Lifters and Ionocrafts Work
https://www.youtube.com/watch?v=01F8V5IhB5k&list=PLFsZmHTZL-znXMyhU5jQvKsJB4zgrq3Jo
Hand-Cranked Laser - TEA Laser Powered by Wimshurst Machine
https://www.youtube.com/watch?v=9huUsYDJZrM&list=PLFsZmHTZL-zmVo7Csiex_9co1uzWg9LTI
Follow behind-the-scenes on:
Twitter https://twitter.com/#!/RimStarz
Google+ https://plus.google.com/116395125136223897621
Facebook https://www.facebook.com/rimstarorg
http://rimstar.org
Thanks to the Make613 gang at Makerspace North for all their support and in particular to Darcy (http://inventorartist.com) for his help with the rubber bands.
A Darker Heart - music by audionautix.com
Видео How to Make an Ornithopter (Rubber band type) канала RimstarOrg
This video was made possible in part by these Patreon supporters:
Jonathan Rieke
James Padden
Juliusz Wojtyga
Support RimstarOrg on Patreon https://www.patreon.com/user?u=680159
or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htm
Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1
Go to the main channel page here https://youtube.com/rimstarorg
Step 0. Introduction 0:00
Step 1. Making the fuselage 0:22
Step 2. The two tubes for the wings to pivot on 0:47
Step 3. Making the tube for the crank and front rubberband hook 1:04
Step 4. Strengthening the front of the fuselage with cotton thread and glue 1:35
Step 5. Making the tail frame 1:43
Step 6. Making the rear motor hook 2:37
Step 7. Attaching the tail and rear motor hook 2:53
Step 8. Making the wing spars 3:03
Step 9. Making the crank and front motor hook 3:41
Step 10. Smoothing the ends of the hooks 4:36
Step 11. Making the connecting rods 4:42
Step 12. Making stoppers 4:55
Step 13. Attaching the wing spars and connecting rods 5:04
Step 14. Different types of tail and wing coverings 5:37
Step 15. Removing the folds in the tissue 5:51
Step 16. Marking and cutting the wing covering 5:59
Step 17. Marking and cutting the tail covering 6:28
Step 18. Attaching the tail and wing coverings 6:30
Step 19. Adding grease/lubrication 6:58
Step 20. Adjusting the tail angle 7:08
Step 21. Using office/household rubberbands 7:14
Step 22. Using special rubber (1/8" tan super sport rubber) 7:26
Step 23. Lubricating the rubber 7:34
Step 24. Winding and attaching the rubber 7:39
Step 25. How to fly it and adjust the tail 8:08
Step 26. Have fun! 8:22
On http://www.ornithopter.org/software.shtml you can find a software tool called FlapDesign for designing the crank, connecting rods and wing spars that helps a lot if you're going to design your own.
See also:
Ornithopter - Rubber Band Wing Flapping Flying Machine
https://www.youtube.com/watch?v=ZvzpsRWl12s&list=PLFsZmHTZL-zn3jrI0X0e0aRijWlyvfg8h
How Ion Propulsion, Lifters and Ionocrafts Work
https://www.youtube.com/watch?v=01F8V5IhB5k&list=PLFsZmHTZL-znXMyhU5jQvKsJB4zgrq3Jo
Hand-Cranked Laser - TEA Laser Powered by Wimshurst Machine
https://www.youtube.com/watch?v=9huUsYDJZrM&list=PLFsZmHTZL-zmVo7Csiex_9co1uzWg9LTI
Follow behind-the-scenes on:
Twitter https://twitter.com/#!/RimStarz
Google+ https://plus.google.com/116395125136223897621
Facebook https://www.facebook.com/rimstarorg
http://rimstar.org
Thanks to the Make613 gang at Makerspace North for all their support and in particular to Darcy (http://inventorartist.com) for his help with the rubber bands.
A Darker Heart - music by audionautix.com
Видео How to Make an Ornithopter (Rubber band type) канала RimstarOrg
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Make Very Easy Airplane . airplane flyingHow to make an
ornithopterDXmicro-M4 Smallest Dragonfly Ornithopter?Amazing RC Ornithopter like a birdHangar Rat indoor rubber band powered model aircraft - Part IIHow to build a robotic hummingbird ornithopter飛んでびっくり!蝶のおもちゃの作り方(メッセージカードとしてもOK)100均DIY便利ライフハックHow to Build Flex Ornithopter - Unique Simple Flapping Mechanism, Easy to Build DIY ProjectBuilding ''Birdy'' Ornithopter Plus Flight VideoHOW TO MAKE A MECHANICAL BIRD (ORNITHOPTER ) (BEST AND SIMPLE)Aerium's Robird Ornithopter Drone V3How to Make a Rubber Band Plane Out of Paper - Very EASYСобираем простой орнитоптер./ How to make ornithopter.Ornithopter - Rubber Band Wing Flapping Flying Machine4 easy rubber band power toys that you can make at your home | 7 days craftHow to build - Simple DIY Ornithopter - Flies Great! Flapping Wingsda vinci history the worlds smallest ornithopterWatch the new Avitron v2.0 Bionic Remote Controlled Bird fly☆МЕХАНИЧЕСКАЯ ПТИЦА своими рукамиHow to Make an Elastic Band Paddle Boat