VLog 5 - Double Swivel Base Seat on the Ford Custom Video

Welcome to our 5th Video Log or should that be Van Log!

In this video we are fitting the Double Seat Swivel for the Ford Custom from Custom Shop Design.

This was quite an involved process which hopefully has been documented in this video. The tools you will need are as follows:

T55 bit for the 4 torque bolts
18mm socket for the nut
T50 bit for the seatbelt
Stanley knife for cutting the rubber and a hard board to go underneath when cutting.
Grinder to cut down the retaining stud.
Lots of tea and patience!

You can find a copy of the instructions here for your reference:
https://drive.google.com/file/d/1itwrWAPEkHvhhdQijqR6H6yUobXbDkwf/view?usp=sharing

Please follow this link to see the item descriptions for the items featured as well as links to them:
https://docs.google.com/document/d/1uUf1aFMSr4eaw5Tqls4Yb7K7hSArdt0G_cKw3RYcukw/edit?usp=sharing

Any questions or comments, please leave them below.

Many thanks,

Custom 2 Camper

Видео VLog 5 - Double Swivel Base Seat on the Ford Custom Video канала Custom 2 Camper