Hydraulic snow plow on Allis Chalmers "B"
This 1939 Allis Chalmers B was outfitted with a 1982 Camaro power steering pump belted to a double pulley installed on the generator. 3/8" break lines were used to cut down on costs. The quick couplers with swivels, were installed mid point so the ram could be used on the front or back of the tractor. Because a double action cylinder was used, the small resevior on the pump was adequate. The receiver frame was hung off the D plate on the front of the engine and support arms were installed back to the torque tube implement mounting points. The 5' steel plow was used on this tractor by my uncle since the late 1960's
Видео Hydraulic snow plow on Allis Chalmers "B" канала gearheadlife
Видео Hydraulic snow plow on Allis Chalmers "B" канала gearheadlife
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
3pt Wood Splitter ConversionSnowmobiles, creeks, and driftsMaking repairs & test drive -Reviving my old buggy part3It looks so nice!! Tractor rim repair part4Insulating an Old Wood Garage Door!!Is that orange paint?? -Tractor rim repair part3Ranger II rock crawlingHaulin wood... againRemoval and refinish -Tractor rim repair part1Big stump, little tractorHydraulic pump reassembly - Rebuilding the pump for my CAFixin up an old seat for the CA!It All Started with a FREE Tractor!This one is pretty bad -Tractor rim repair part2ATV plow hoisting dilemma: solved!Hydraulic pump tare down -Rebuilding the pump for my CA part11939 Allis Chalmers B plowingHomemade Waste Oil BurnerHomemade waste oil burner 2.0Bronco II 4x4 new look