For Nissan Qashqai Tailgate Boot Handle Repair Clip Kit Clips Snapped 2006 -2013 Instructions Guide

Please be aware!
Note: if paint on rear of handle remove this first with sandpaper to allow Acetone to melt the plastic.

Note: make sure Acetone melts plastic before fitting the clips to the handle, IT IS NOT GLUE. The surface needs to start melting for the parts to fuse together.

The Problem

It is very common for the clips on the inside of the tailgate handle to snap.

The small plastic clips moulded on the inside of the tailgate handle snap causing the handle to become loose, making it difficult to open the boot.

This is a very common fault on these vehicles; these clips simply aren’t strong enough and will inevitably break.

The solution until now was to purchase a complete handle, not only is a new handle expensive, it would also need to be colour coded and ultimately would have the same flawed design which would only fail again.

Symptoms of the fault

Tailgate handle internal clips, snapped, damaged, broken. These snap or break off completely leaving the handle, loose or hanging.

Vehicles affected

Nissan Qashqai (2006 - 2013)
Nissan Qashqai +2 (2008 - 2013)
Nissan Dualis (Japan / Australia)

Will fit all variants with / without reverse camera, with / without I-Key.

Associated part numbers:
90812JD00H, 90812JD20H, 90812JD01H, 90812JD30H.

Our solution

Install our replacement improved design clips and refit your boot handle securely.

Install our replacement clips and reuse your existing handle, saving the cost / need to colour code a new handle which would only fail again.

Our unique clips are very easily fitted, no need for measuring (with potential for mistakes like other kits). Our parts aline to the handle perfectly, no measuring at all just pop in place. No adjustments needed.

Our clips are moulded from ABS plastic NOT 3D printed so quality is assured. Our clips are easily fused to the original handle using Acetone included in our kit. Providing a far superior fastening to any glue.

Our clips are a complete redesign; thicker and stronger in every dimension and designed for life long use. Suited to the application and all temperatures. The original screws simply click in to our clips allowing easy fitting back to the vehicle with no specialist tools required.

Check out our video and instructions to see how easy this repair is with our unique kit.

You will receive

1 x Left hand clip block
1 x Right hand clip block
1 x Pure Acetone

Видео For Nissan Qashqai Tailgate Boot Handle Repair Clip Kit Clips Snapped 2006 -2013 Instructions Guide канала X8R Ltd