Easy waterproof Cable and Wire Splice
If you've ever accidentally chopped through a wire or electrical cable, you know how much fun it can be to try to repair it so that it stays waterproof, dust proof, weatherproof, etc.
I recently had just such a fun experience myself. It turns out that there are quite a few nice products out there to make the splicing process WAAAAY easier.
Keep in mind that the type of splice you use depends greatly on the application - and even the type of wire (solid vs stranded).
A wire splice for an automotive-type application must be pretty strong, because vibration is obviously an issue.
An underground electrical cable doesn't have to withstand vibration, but it definitely needs to be waterproof!
Note that I forgot to mention one product in the video: 3M Scotchlok connectors. They are good for wires up to 1.5mm^2, and they're water resistant. BUT, they may not be very good for high-vibration applications due to the way the blades inside bite into the copper wires. These are the same type of connectors your phone company tech usually uses for phone line wire connections, only bigger.
Links to the goodies mentioned in the vid (affiliate links):
- 3-wire (single-phase) cable splice connector: http://amzn.to/2j5pGOR
- 5-wire (3-phase) cable splice connector: http://amzn.to/2AoXXgx
- Stranded copper butt splice assortment: http://amzn.to/2j82ShC
- 3M Scotchlok 1.5mm^2 3-wire grease-filled crimp connectors: http://amzn.to/2AqLUiq
- 3M Scotchcast 1000V insulating resin: http://amzn.to/2yc20uX
More techie tips: https://scottiestech.info
Видео Easy waterproof Cable and Wire Splice канала ScottiesTech.Info
I recently had just such a fun experience myself. It turns out that there are quite a few nice products out there to make the splicing process WAAAAY easier.
Keep in mind that the type of splice you use depends greatly on the application - and even the type of wire (solid vs stranded).
A wire splice for an automotive-type application must be pretty strong, because vibration is obviously an issue.
An underground electrical cable doesn't have to withstand vibration, but it definitely needs to be waterproof!
Note that I forgot to mention one product in the video: 3M Scotchlok connectors. They are good for wires up to 1.5mm^2, and they're water resistant. BUT, they may not be very good for high-vibration applications due to the way the blades inside bite into the copper wires. These are the same type of connectors your phone company tech usually uses for phone line wire connections, only bigger.
Links to the goodies mentioned in the vid (affiliate links):
- 3-wire (single-phase) cable splice connector: http://amzn.to/2j5pGOR
- 5-wire (3-phase) cable splice connector: http://amzn.to/2AoXXgx
- Stranded copper butt splice assortment: http://amzn.to/2j82ShC
- 3M Scotchlok 1.5mm^2 3-wire grease-filled crimp connectors: http://amzn.to/2AqLUiq
- 3M Scotchcast 1000V insulating resin: http://amzn.to/2yc20uX
More techie tips: https://scottiestech.info
Видео Easy waterproof Cable and Wire Splice канала ScottiesTech.Info
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Taking screenshots is easier than you thinkMeltdown & Spectre: DO NOT PANIC!5G + Airplanes: Europe's smarter 5G rollout #5gDIY stain remover that costs pennies and works wondersWhat do YOU want to see?Make it stick with Superglue Secrets!Airplanes, lightning, & the wild world of Static ElectricityThe Secret of solving Tech ProblemsMissing Boot Drive after an upgrade?Blockchain and Cryptos explained for Non-TechiesA REAL fix for low mic volume!Make your color prints POP! #colorprinter #techadvicePhishing Scams and how to protect yourselfHow NOT to clean your screenDude, your e-mail's been hacked!What you need to know about Online SecurityAmazing Candle Life HackCODE SMARTER! (with 50% less irritation)Best LED flashlights out there 🔦Is Big Tech in Big Trouble?When NOT to use Dirty Electricity filters!