Harman P-Series Feed System

Get the pellet stove parts you need here: https://pellet-stove-parts-4less.com. In this video, Scott Williamson gives you a step-by-step tutorial of how the feed system in a Harman P-Series pellet stove works plus all of the individual steps required to disassemble the feed system for troubleshooting, maintenance, or installing replacement parts.

For this video, he's demonstrating on a Harman P61-A but the layout and procedures are basically the same for all of the P-Series Stoves; to include P38+, P43, PC-45, P61, P61-A, and the P68. If you liked the video, please leave a "thumbs-up" on the like button and subscribe to our channel for more pellet stove professional How-To's. As always, ask any additional questions in the comment section down below!

Timestamp:

0:20 How to: Remove Rear Panel
2:08 Information: Locate Auger Motor
How to: Remove Power Leads 2:33
How to: Release the Set Screw 3:09
How to: Mounting Bracket Orientation 3:36
Information - Pusher Arm and Set Screw Roller Cam 4:05
Information: Fines Collection Box Cover 4:24
Information: The Feed Plate 5:10
Information: How the Feed System Works 5:31
How to: Correct Way to Reinstall the Feed Plate 7:10
Information: What the Feeder By-pass Hose Does 9:38
How to: Remove the Roller Cam Set Screw 10:37
How To: Remove the Feed Auger 11:06
Information: Feed Auger Replacement 12:09
How to: Removing a Jam from the Feeder Body 13:22
How to: Install the Feed Auger 13:55
How to: Properly Install the Roller Cam Set Screw 15:40
How to: Install the Auger Motor 16:38
How to: Install the Feed Plate 18:08
How to: Connect the Auger Wires 19:16
How to: Install the Fines Collection Box Cover

Part Numbers for Products in this Video:

4 RPM Auger Motor: P38+, PC-45, P43, P61, P61-A (3-20-60906)
6 RPM Auger Motor: P68 (3-20-09302)
Auger Motor Mounting Bracket: (1-00-247406)
Cam Roller Set Screw (3-00-677154)
Feeder Bearing Retainer (1-00-04035)
Feeder By-Pass Hose Kit: (1-00-67900)
Auger Shaft (3-50-00565)
Feed Pusher Arm (1-10-677187W)

Scott Williamson is the director of technical help for https://www.pellet-stove-parts-4less.com and was the founder/ owner of Pelletstoveservice.com, the first and foremost independent pellet stove ONLY service provider in the country. His pellet heating service business encompassed most of New England with over 15,000 service calls to his credit; servicing nearly every brand of pellet stove that has been made. Scott produces the content for this channel from his farm in Rehoboth, MA, and contributes articles for our blog pages at: https://pellet-stove-parts-4less.com/blogs/all. Since 2011 Scott has served as an advisory board member for the Alliance for Green Heat in Washington, D.C. and has been a lively speaker at many wood pellet industry events.

Thanks for watching!

Видео Harman P-Series Feed System канала Stove & Grill Parts For Less