Filament Spool Holder - 3D Printer
Original Monoprice Select Mini: http://amzn.to/2tRxh8N
New Monoprice Select Mini V2: http://amzn.to/2FZD4hy
BLOG POST: http://davewirth.blogspot.com/2017/04/filament-spool-holder-3d-printer-mp.html
PlayList of all my 3D Printing Video's: https://goo.gl/FKD0Tq
Something that bothered me immediately with the MonoPrice Select Mini 3D printer was the filament holder arm. I didn’t like the fact that it was made of square steel and that it was mounted at 90 degrees to the printer. It didn’t spin smoothly and pulled the filament at an odd angle.
I decided to make a new filament holder that would be mounted parallel to the printer and be able to spin much easier. I ended up making the filament holder out of plywood and PVC pipe. It’s simple design simply snaps onto the frame rail of the 3D printer and doesn’t require any complicated brackets. The PVC pipe allows for very smooth unrolling of the filament spool with very low friction, no wheel bearings are needed.
This is a great modification that you can easily make for your printer, which prevents any clogging and jamming from stuck filament.
(Disclosure Note: Please note that the Amazon link(s) above are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase after clicking through the link.)
Видео Filament Spool Holder - 3D Printer канала Dave Wirth
New Monoprice Select Mini V2: http://amzn.to/2FZD4hy
BLOG POST: http://davewirth.blogspot.com/2017/04/filament-spool-holder-3d-printer-mp.html
PlayList of all my 3D Printing Video's: https://goo.gl/FKD0Tq
Something that bothered me immediately with the MonoPrice Select Mini 3D printer was the filament holder arm. I didn’t like the fact that it was made of square steel and that it was mounted at 90 degrees to the printer. It didn’t spin smoothly and pulled the filament at an odd angle.
I decided to make a new filament holder that would be mounted parallel to the printer and be able to spin much easier. I ended up making the filament holder out of plywood and PVC pipe. It’s simple design simply snaps onto the frame rail of the 3D printer and doesn’t require any complicated brackets. The PVC pipe allows for very smooth unrolling of the filament spool with very low friction, no wheel bearings are needed.
This is a great modification that you can easily make for your printer, which prevents any clogging and jamming from stuck filament.
(Disclosure Note: Please note that the Amazon link(s) above are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase after clicking through the link.)
Видео Filament Spool Holder - 3D Printer канала Dave Wirth
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![3D Printing: Monoprice Select Mini Glass Bed Installation](https://i.ytimg.com/vi/afzMsZSgjzk/default.jpg)
![](https://i.ytimg.com/vi/uHFot3My_T0/default.jpg)
![Top 10 3D Printable Tools Every Maker Should, Like, Make](https://i.ytimg.com/vi/1kG1D-e284A/default.jpg)
![Universal stand-alone filament spool holder (fully 3D-printable)](https://i.ytimg.com/vi/X6ArZeWYSZE/default.jpg)
![Full Blender Tutorial - for 3D Modeling and 3D Printing](https://i.ytimg.com/vi/yYUGMvZsu3w/default.jpg)
![BEST FILAMENT SPOOL HOLDER - CHEAPEST PRINTABLE ONLY ONE 608 BEARING - DIY - FREE MODEL DOWNLOAD](https://i.ytimg.com/vi/ivMTiip6tRE/default.jpg)
![Monoprice Mini - Glass Bed install](https://i.ytimg.com/vi/JoTiLsxXFjQ/default.jpg)
![The Smart Spool Holder [EN]](https://i.ytimg.com/vi/cX-9fWV7gJY/default.jpg)
![What is Carbon Fiber Nylon Filament and Should You 3D Print It - Pt. 1](https://i.ytimg.com/vi/hzOxJtkJ73Q/default.jpg)
![3D Printer XBOX 360 power supply](https://i.ytimg.com/vi/d4Oj7Z8SjGQ/default.jpg)
![Monoprice Delta and Select Mini Glass Bed Upgrade](https://i.ytimg.com/vi/iAxyyy09_oc/default.jpg)
![3D Printing Problems: Tangling Spools](https://i.ytimg.com/vi/9vYKMIkZ4Bw/default.jpg)
![Fine Wire and Filament Respooler with Powered Payoff](https://i.ytimg.com/vi/VoJMiNa4jxw/default.jpg)
![Building a Spool Holder for 10kg filament spools for my 3D Printer!](https://i.ytimg.com/vi/9XBuF4Nzlkc/default.jpg)
![3D PRINTING - PVC SPOOL HOLDER](https://i.ytimg.com/vi/FXdAL-MNP3s/default.jpg)
![TUSH - The Ultimate Spool Holder](https://i.ytimg.com/vi/L5mxsH1ULAw/default.jpg)
![The Quest For 3DP Filament Spool Holding Perfection](https://i.ytimg.com/vi/8zT_F1Q-Sxg/default.jpg)
![Improve Snapmaker 3D print quality | Lithophane night lights](https://i.ytimg.com/vi/ft_mqlEr7vI/default.jpg)
![Extruder Clicking / Popping / Slipping / Skipping ? Ender 3 Pro spool holder with low friction](https://i.ytimg.com/vi/xIlNOeuk-io/default.jpg)
![Best method for 3D printer bed levelling](https://i.ytimg.com/vi/RZRY6kunAvs/default.jpg)