Testing inexpensive CNC machine Genmitsu PROVerXL 4030 / Sainsmart. Is it possible to make inlay?

We have received questions on could an inexpensive CNC machine be capable of making inlay cutting boards?

Our friends over at Sainsmart provided us their new machine to test this idea.

In this video, we are testing the Sainsmart PROVerXL 4030 benchtop CNC ( https://shrsl.com/2jzcl ) configured with a Dewalt DWP611 router ( https://amzn.to/2SOFV1I ).

The answer is definitely yes!
Inlay's can be made on an inexpensive machine like the PROVerXL . However, like all equipment, one should carefully approach the choice of machine they purchase, and based on their technical needs and recognize there will be initial setup that can require specific skills to get the best results.

The PROverXL is well suited for a small workshop and smaller projects with its 400 x 300mm work area.

If you want a custom board please email us broinwood@gmail.com

For orders go to https://broinwood.com/pages/custom

Check out our instagram page https://www.instagram.com/broinwood/

Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.

Definitely recommend this Oil and Wax for cutting board:
https://amzn.to/36ytyi1
https://amzn.to/3nrAPGL

My glue:
https://amzn.to/3jyVMNu (really love it)

Double-Sided Duct Tape:
https://amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)

My Random Orbit Sanders I love how they work but they get a little dusty:
https://amzn.to/36u5mxs
https://amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
https://amzn.to/33uGmnS

My Sanding Disc (for me they are the best!!!):
3M Cubitron II
https://amzn.to/2SrnAHs (80 and 120 grit)
https://amzn.to/2SqlvvH (150 grit)
https://amzn.to/3nksyUQ (220 grit)
https://amzn.to/2GriKaZ (320 grit)

My router bits which I use a lot:
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
https://amzn.to/3izKXcF

15 Degree v bit (be careful easy to breake down)
https://amzn.to/3izLyLr

Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
https://amzn.to/2SsZYlV (I use it for juice groove)

1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
https://amzn.to/33v99Zm (I use it for juice groove)

Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
https://amzn.to/2SsB8m7

Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
https://amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)

Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
https://amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)

My Collet Set:
https://amzn.to/33xbO4X

My DEWALT Plate Joiner:
https://amzn.to/33xtkWQ (it is not bad and not good it is ok)

My Bandsaw Blade it is inexpensive and cut well:
https://amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel, where you can see my woodworking: cutting boards with inlay from different types of wood, wood maps, key hangers and more. I often use CNC machine for my works, I love using it. I’m going to share my videos every week.
Thank you for visiting my channel. I appreciate your likes and subscriptions!

Sincerely,
Nik.

Видео Testing inexpensive CNC machine Genmitsu PROVerXL 4030 / Sainsmart. Is it possible to make inlay? канала Broinwood