Pulling the hubs Model A Ford

Check the Model A online forums for tips and procedures.
..
https://modelagarage.com/service_bulletin/removing-rear-hub-and-brake-drum-assembly/
..
Before installing puller to remove rear hub and brake drum assembly, remove axle shaft nut, and screw it onto the axle shaft with the castles on the nut pointing inward (see Fig. 591). The nut should be screwed down until it is flush with end of shaft, then apply puller in the regular way. Placing nut on shaft prevents mushrooming or swelling end of shaft when pulling off drum.

Видео Pulling the hubs Model A Ford канала wild spectre