DIY: How to Make and Install an Indoor Swing

Here is a quick and easy DIY tutorial video on how to build and install a hanging swing in a kid's room. This tutorial will show you everything you need to know to make and hang an indoor swing in a kid's bedroom.

Please remember to like and subscribe to our channel if you found this video useful!

Steps:
1. Cut board to 22" wide
2. Use a palm sander to sand and all edges to make rounded
3. Using 1/2" drill bit, drill holes for rope 1.5" from each corner edge
4. Paint both sides and edges of wood with a coat of triple-thick polyurethane
5. Using stud finder, locate and mark wood stud to hang swing from ceiling
6. Drill small pilot holes in ceiling wood stud 19" apart
7. Screw in eye hooks by hand and finish tightening using a pipe wrench
8. Add quick link chain connectors and tighten by hand
9. Loop rope through quick links and through holes on each side of board. Attach with knots and hang board 18" from the ground.
10. Swing on it and enjoy!

Materials used:
- 5/4" x 8" wood board
- screw eye hooks (*the link below comes with carabiners)
https://amzn.to/3hg9PGj
- quick link chain connectors
https://amzn.to/2B13zm2
- hemp rope
https://amzn.to/2DN2hw8
- triple-thick polyurethane

-------------------------------------

Follow us on Instagram
https://www.instagram.com/mamadrey88/

#diyswing
#diyprojects
#diykids
#indoorswing

Видео DIY: How to Make and Install an Indoor Swing канала Happily Before and After