Subaru Legacy JDM Headlight Conversion Facelift Rev D-F

I'm starting off my JDM Legacy Spec B Rev D-F conversion by converting the JDM headlights to USDM. THIS IS A LONG VIDEO! But this is also probably the most thorough video you'll find on how to do this. I go into a lot of detail, particularly about the signals, so if you don't need to see a particular part just skip it. This video also works for if you're doing a Rev A-C headlight conversion, ie; you have an 05-07 Legacy and bought some JDM headlights you're swapping onto your car without doing anything else. All of the wiring, shield flip, and signal stuff will be the same except the DRLs will look different. PS: these 3157 adapters have bad quality control. If you're having problems test the connectivity with a multimeter to see if you made a wiring mistake or if it's the adapter. I ended up cutting out the adapter all together and splicing the wires into the car harness since I won't be changing this car back. It worked flawlessly.

Overview and wiring 2:07
Signals 13:50
Shield flip 17:16

Electrical connectors/adapters used:
3157 Adapter -https://amzn.to/3adEqkc
7443 socket - https://amzn.to/3cdJG9b
7443 switchback bulbs - https://amzn.to/2Cr6PYc
Heatshrink solder connectors - https://amzn.to/3aazEUw

As an Amazon Associate I earn from qualifying purchases (but this doesn't cost you anything at all).

Видео Subaru Legacy JDM Headlight Conversion Facelift Rev D-F канала RP Garage