Peeling Paint Repair Masking Tape Fail Part 2
Peeling Paint Repair Masking Tape Fail Part 2 STEP BY STEP MUST WATCH THIS REPAIR
Issue was removed tape and paint came off with it, so I mudded the edges and started over here are the steps
1. Peel off paint til it can't peel no more
2. Feather paint edges
3. Mud paint edges and all areas that need mud
4. Dry or Wet sand mud
5. Applied PVA Primer
6. Sprayed trim with Graco Sprayer
7. Cut in edges and painted boxes
Видео Peeling Paint Repair Masking Tape Fail Part 2 канала CountrySideClub
Issue was removed tape and paint came off with it, so I mudded the edges and started over here are the steps
1. Peel off paint til it can't peel no more
2. Feather paint edges
3. Mud paint edges and all areas that need mud
4. Dry or Wet sand mud
5. Applied PVA Primer
6. Sprayed trim with Graco Sprayer
7. Cut in edges and painted boxes
Видео Peeling Paint Repair Masking Tape Fail Part 2 канала CountrySideClub
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Final Prime with all panels on before disassemblyLS ENGINE TEAR DOWN STEP BY STEP 'JOURNEY BEGINS' DARKNESS PART 174 Cutlass Supreme Restoration "The Journey" Welding the fender and Body Filler Part 274 Cutlass Supreme Restoration "The Journey" Welding Fender and Body Filler Part 574 Cutlass Supreme Restoration " The Journey" Welding Fender and Body FillerWill It Ever get Painted!!! "The Journey" Continues..is it a Water channel????PLAN FOR LS SWAP STEP BY STEP 'DARKNESS' GETS LS Swap IntroPre-masking for jambs and setting up shop and prepping materials "The Journey"Painting "DARKNESS" Rear BumperPainting Door jambs 'Clearcoating' Wrong Pressure and RedoApplying POR 15 Painting/Welding Firewall and Frame DARKNESS PART 574 Cutlass Supreme Restoration "The Journey" Customizing No Side Markers Welding PatchesREPLACING Floor Panel, Rusted Floor 74 Cutlass Supreme Restoration "The Journey"Back to block sanding and starting reassembly "The Journey"74 Cutlass "The Journey" Floor Evaluation getting ready to replace Floor PansHow to block sand guide coat 74 Cutlass "The Journey"Installed Lights for paint booth and disassembly "The Journey" 74 Cutlass74 Cutlass Supreme Restoration "The Journey" Welding the fendor and using body filler74 Cutlass "The Journey" Repriming (Spot priming with high build) Part 1Painting the Cutlass Supreme "The Cutty"Greg Porter (Greg's Garage) WHO!!! Happy Memorial Day Mail Call