My Results From Testing Epax3D NFEP FEP Replacement | I’m Totally Sold
EPAX NFEP Small: https://geni.us/EPAX-NFEP-Small
EPAX NFEP Large: https://geni.us/EPAX-NFEP-Large
Standard FEP: https://geni.us/AnycubicPhotonFEP (You want 0.15mm)
Voxelab Proxima: https://geni.us/VoxelabProxima
Anycubic Photon Mono: https://geni.us/AnycubicPhotonMono
Elegoo Mars Mono: https://geni.us/ElegooMarsMono
Phrozen Sonic Mini 4K: https://geni.us/PhrozenSonicMini4K
EPAX E6: https://geni.us/EpaxE6Printer
Anycubic Photon Mono X: https://geni.us/AnycubicPhotonMonoX
Elegoo Saturn: https://geni.us/ElegooSaturn
Phrozen Sonic Mighty: https://geni.us/PhrozenSonicMighty
My Favorite Resin Rakings: http://www.elitegeek.net/water-washable-resin-review/
Have you tried NFEP? It is a little more expensive that traditional FEP, but is it worth? I have tested it now in three printers and I have to say, I am very impressed. It is just more forgiving than traditional FEP. I haven’t had to replace it yet, but time will tell how it responds in the long run. For the little bit more expensive it is I plan on using it on all of my printers.
Just want to support the channel at no cost to you? You can with these links:
Anycubic Store: https://geni.us/AnycubicStore
Phrozen Store: https://geni.us/PhrozenStore
Sovol Store: https://geni.us/Sovol3DStore
Epax3D Store: https://geni.us/Epax3DStore
Banggood: http://bit.ly/DR101-Banggood
Amazon: https://geni.us/EGAmzCoffee
If this was helpful consider buying me a coffee so I can make more videos: https://www.buymeacoffee.com/TrueEliteGeek
Or I will be going behind the scenes on Patreon Soon: https://www.patreon.com/EliteGeek
**************************************************
Subscribe and be a EliteGeek! : https://www.youtube.com/c/TrueEliteGeek?sub_confirmation=1
Enjoy & remember to like and subscribe!
-- Find Elite Geek Online! --
Facebook: http://www.facebook.com/EliteGeekMinis
Instagram: http://www.instagram.com/EliteGeekMinis
Elite Geek is a participant in the Amazon Services LLC Associates Program and other affiliate programs, advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and other sites at no addition cost to you.
Thank you for supporting Elite Geek by using these links. Testing all this hardware is quite expensive.
Видео My Results From Testing Epax3D NFEP FEP Replacement | I’m Totally Sold канала True Elite Geek
EPAX NFEP Large: https://geni.us/EPAX-NFEP-Large
Standard FEP: https://geni.us/AnycubicPhotonFEP (You want 0.15mm)
Voxelab Proxima: https://geni.us/VoxelabProxima
Anycubic Photon Mono: https://geni.us/AnycubicPhotonMono
Elegoo Mars Mono: https://geni.us/ElegooMarsMono
Phrozen Sonic Mini 4K: https://geni.us/PhrozenSonicMini4K
EPAX E6: https://geni.us/EpaxE6Printer
Anycubic Photon Mono X: https://geni.us/AnycubicPhotonMonoX
Elegoo Saturn: https://geni.us/ElegooSaturn
Phrozen Sonic Mighty: https://geni.us/PhrozenSonicMighty
My Favorite Resin Rakings: http://www.elitegeek.net/water-washable-resin-review/
Have you tried NFEP? It is a little more expensive that traditional FEP, but is it worth? I have tested it now in three printers and I have to say, I am very impressed. It is just more forgiving than traditional FEP. I haven’t had to replace it yet, but time will tell how it responds in the long run. For the little bit more expensive it is I plan on using it on all of my printers.
Just want to support the channel at no cost to you? You can with these links:
Anycubic Store: https://geni.us/AnycubicStore
Phrozen Store: https://geni.us/PhrozenStore
Sovol Store: https://geni.us/Sovol3DStore
Epax3D Store: https://geni.us/Epax3DStore
Banggood: http://bit.ly/DR101-Banggood
Amazon: https://geni.us/EGAmzCoffee
If this was helpful consider buying me a coffee so I can make more videos: https://www.buymeacoffee.com/TrueEliteGeek
Or I will be going behind the scenes on Patreon Soon: https://www.patreon.com/EliteGeek
**************************************************
Subscribe and be a EliteGeek! : https://www.youtube.com/c/TrueEliteGeek?sub_confirmation=1
Enjoy & remember to like and subscribe!
-- Find Elite Geek Online! --
Facebook: http://www.facebook.com/EliteGeekMinis
Instagram: http://www.instagram.com/EliteGeekMinis
Elite Geek is a participant in the Amazon Services LLC Associates Program and other affiliate programs, advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com and other sites at no addition cost to you.
Thank you for supporting Elite Geek by using these links. Testing all this hardware is quite expensive.
Видео My Results From Testing Epax3D NFEP FEP Replacement | I’m Totally Sold канала True Elite Geek
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How To Replace Fep Nfep With Perfect Tension All The Time](https://i.ytimg.com/vi/7pTcUBcP_iU/default.jpg)
![How to Angle your Resin Print for the Smoothest Surface Possible. Real life use of trigonometry!](https://i.ytimg.com/vi/Qs2Rb0ExnIM/default.jpg)
![10 Tips for your FEP](https://i.ytimg.com/vi/snopoBc50uo/default.jpg)
![Why Resin 3D Prints Fail - Improve Your Prints - Tips on Understanding Overhangs and Supports](https://i.ytimg.com/vi/pbYAhjASGFY/default.jpg)
![When Why and How I clean and apply PTFE Lube on my FEP](https://i.ytimg.com/vi/uJlyJAg3BBk/default.jpg)
![How to Change the FEP in the Anycubic Photon Mono-X 3D Printer | No Need for Tuning](https://i.ytimg.com/vi/33MSMufwN-w/default.jpg)
![NFEP for resin 3d printing, you're not using this?? WTF?!?! We need to talk about this!](https://i.ytimg.com/vi/B05d4fdrb6Q/default.jpg)
![Alligator Snapping Turtle Resin Diorama | Testing the new (unreleased) Anycubic Photon Ultra!](https://i.ytimg.com/vi/poUIGl2rpFY/default.jpg)
![The MANDALORIAN - 3Dprinting & Painting N’stuff](https://i.ytimg.com/vi/4mLBYk6do8w/default.jpg)
![The WEIRD resin printing trick that PERFECTLY tensions my resin vat FEP Sheets](https://i.ytimg.com/vi/9YY5MNZw_6w/default.jpg)
![How to Change the FEP in the Voxelab Proxima 3D Printer](https://i.ytimg.com/vi/nrXe_sDjl-Y/default.jpg)
![Painting The Mandalorian Premium Format™ Figure | Behind the Scenes](https://i.ytimg.com/vi/SXMuvoQp9eQ/default.jpg)
![How to replace Sonic Mini 4K FEP (Replace for nFEP film)](https://i.ytimg.com/vi/CoSNNSVKLbU/default.jpg)
![How to install a Screen Protector on a Resin 3D Printer and level the build plate on the Mighty 4K](https://i.ytimg.com/vi/hdGsdDxXLDg/default.jpg)
![How to Clean Your Resin 3D Printing Vat and Avoid Clouding!](https://i.ytimg.com/vi/cvMYSMkQvdw/default.jpg)
![Make Money 3D Printing in 2021 | Over $100K Per Year](https://i.ytimg.com/vi/gKDDoSryluo/default.jpg)
![Voxelab Proxima Unboxing, Setup and Test Prints | Maybe the Cheapest Mono Resin Printer?](https://i.ytimg.com/vi/9Fuhwn3mU7U/default.jpg)
![Find The Perfect Exposure Time For Resin Printer - Anycubic Photon Mono X](https://i.ytimg.com/vi/zSQtMmLVdRg/default.jpg)
![Where to buy cheap FEP sheets for your resin SLA printers](https://i.ytimg.com/vi/b_MiesCNlUk/default.jpg)
![Leveling the Plate for Resin 3d printing - Flint Read v Paper method!](https://i.ytimg.com/vi/Zh9dx1fKnqI/default.jpg)