DIY Hotplate
Quick build of a DIY hotplate for SMD soldering. The hotplate uses two cheap standard heating cartridges for 3d printers (50W 24V each). Heat plate is 10mm aluminum. Temperature is controlled by a Teensy LC. The board soldered in the video is a DIY microMod Teensy 3.2 board (see https://github.com/luni64/MicroMod_3.2)
Видео DIY Hotplate канала luni64
Видео DIY Hotplate канала luni64
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Homemade Reflow HOT Plate - Version 2 | Low Cost
MiniWare MHP30 Hot Plate Review ll Reflow, Rework, Solder or De-solder SMD or THT components
Hair Straightener in to LED REMOVER DIY
I Needed A Reflow Oven, so I made one!
#192 Aldi Hack: Simplify SMD Soldering with a Cheap Aldi Oven. Nothing else
PID controlled PCB reflow hotplate using Aluminium PCB
DIY SMD-PCB - Part 2: Reflow soldering with hotplate (K-Type Thermocouple-MAX6675) -Arduino control
DIY Dispenser
PTC Heating Plate For Desoldering LED Lamp beads BGA,Thermostat Heater Welding Soldering Plate
Making a PCB Heater (to reflow PCBs)
PTC히터를 활용 한 핫 플레이트
Remove & Solder any SMD components using this Hot plate smd led remov machine how to make it
How to Reflow SMD parts inexpensively with a tiny hotplate for less than 3 dollars, enjoy the show.
How to do SMD Reflow Soldering properly! || Hot Air VS Sand VS Reflow Oven
SDG #191 Miniware MHP30 SMD Rework Mini Hotplate
MMStep, compact MicroMod stepper driver board
Easy to make SMD Hotplate for Reflowing PCBs
Reflow oven or hot plate? I went for the reflow soldering hot plate - 100% automated
Soldering with a hot plate
PTC Heating Thermostat Heater Plate For TV Backlight LED soket FPC IC BGA welding Soldering station