CNC Plasma table - P4 - Wiring, floating head (no THC), torch relay (Mach3, SheetCam) - 1st cuts

#CNCPlasma
#DIYCNCMill
#3018CNC
#Fusion360
#Mach3
#Tutorials

Link to 3D CAD design:
https://grabcad.com/library/cnc-plasma-cutting-table-for-under-750-1
In this video, I finished my CNC plasma table build with the wiring, setting up the floating head (I don't have the torch height control - aka THC) and torch relay (make the plasma cutter CNC compatible without modifying the torch or the plasma cutter itself). I also added a spring setup to create a pressure for the floating head without adding too much more weight to the Z axis and redesign the torch holder.
The wiring was easy, the configurations with Mach3 and SheetCam were a breeze. All the functions worked correctly.
Since I don't have any experience with this type of equipment yet, the first cuts were kinda ugly. I will need to spend more time to figure out all the parameters needed for some clean cutting in the future.
Link to buy:
Plasma cutter cut50:
https://www.ebay.com/itm/Plasma-CNC-50P-Pilot-arc-Plasma-cutter-WELDERS-WSD60P-torch-Compact-amp-110-220V/231585367568?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
P80 straight torch:
https://www.ebay.com/itm/Plasma-Cutter-Cutting-Torch-Head-Body-CNC-P80-Complete-Gun-3-Meter-For-CUT-LGK-/362706891670?hash=item547303f396
2 pin connector (fit cut50 plasma cutter):

https://www.ebay.com/itm/TIG-Welding-Plasma-Cutter-2-Pin-Plug-Socket-Bulkhead-Type-1-2-US-SHIP/321870482787?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Видео CNC Plasma table - P4 - Wiring, floating head (no THC), torch relay (Mach3, SheetCam) - 1st cuts канала Minh's man cave