BMW N62 Vacuum Pump Oil Leak Repair - 650i 645i 750i 745i
O-Rings: https://amzn.to/37FH2sR
Parts and Tools: https://www.amazon.co.uk/shop/timmsbmwrepairsandinformation
Timms BMW Repairs and Information. As a general rule I’m not too worried by a small oil-leak, after owning seven M62 V8’s you get used to the slight weeps around the valve covers. The problem with the leak from the vacuum pump on my 650i is that the oil blows back onto the exhaust manifold - and that stinks.
Seals: https://amzn.to/2Z27Z7j
M6 x 15 SS Bolts: https://amzn.to/2ZfKL8Z
M6 x 10 SS Bolts: https://amzn.to/2TK45K1
Washers: https://amzn.to/2Mlt3Pb
These pumps are a problem on many models of BMW - the leak comes mainly from the front o-ring which is under the machined front cover. The cover is thin and only has five fixings, a tiny loss of elasticity of the o-ring and the small bow of the cover between fixings is enough to let the oil out.As there is very little manifold vacuum, when the throttle is given a good poke the crankcase pressure cannot be relieved by the feeble vacuum pump.
The positive pressure is too much for the thin face plate on the pump and out comes the oil - it gets blown backwards and onto the exhaust. It is easy to think that you have fixed this oil-leak as during normal driving it doesn’t leak, but after a good thrashing it can start spewing oil out again.
There are a few routines around on various BMW models for replacement of the o-rings and I looked at quite a few before I started this job, but using the standard method there is a possibility of breaking the lugs on the pump and other ghastly hassles that you don’t need. I decided to do the job in an unusual order so that there is no possibility of damaging the pump - but I’ll explain this as we go along.
The on-line routine can be found here:
https://www.meeknet.co.uk/E64/Timms_BMW_E63_and_E64_N62_Vacuum_Pump_Oil_Leak_Repair.htm
#BMWVacuumPump #BMWOilLeak #VacuumPumpRepair
Видео BMW N62 Vacuum Pump Oil Leak Repair - 650i 645i 750i 745i канала Timm's BMW Repairs and Information
Parts and Tools: https://www.amazon.co.uk/shop/timmsbmwrepairsandinformation
Timms BMW Repairs and Information. As a general rule I’m not too worried by a small oil-leak, after owning seven M62 V8’s you get used to the slight weeps around the valve covers. The problem with the leak from the vacuum pump on my 650i is that the oil blows back onto the exhaust manifold - and that stinks.
Seals: https://amzn.to/2Z27Z7j
M6 x 15 SS Bolts: https://amzn.to/2ZfKL8Z
M6 x 10 SS Bolts: https://amzn.to/2TK45K1
Washers: https://amzn.to/2Mlt3Pb
These pumps are a problem on many models of BMW - the leak comes mainly from the front o-ring which is under the machined front cover. The cover is thin and only has five fixings, a tiny loss of elasticity of the o-ring and the small bow of the cover between fixings is enough to let the oil out.As there is very little manifold vacuum, when the throttle is given a good poke the crankcase pressure cannot be relieved by the feeble vacuum pump.
The positive pressure is too much for the thin face plate on the pump and out comes the oil - it gets blown backwards and onto the exhaust. It is easy to think that you have fixed this oil-leak as during normal driving it doesn’t leak, but after a good thrashing it can start spewing oil out again.
There are a few routines around on various BMW models for replacement of the o-rings and I looked at quite a few before I started this job, but using the standard method there is a possibility of breaking the lugs on the pump and other ghastly hassles that you don’t need. I decided to do the job in an unusual order so that there is no possibility of damaging the pump - but I’ll explain this as we go along.
The on-line routine can be found here:
https://www.meeknet.co.uk/E64/Timms_BMW_E63_and_E64_N62_Vacuum_Pump_Oil_Leak_Repair.htm
#BMWVacuumPump #BMWOilLeak #VacuumPumpRepair
Видео BMW N62 Vacuum Pump Oil Leak Repair - 650i 645i 750i 745i канала Timm's BMW Repairs and Information
Показать
Комментарии отсутствуют
Информация о видео
25 мая 2018 г. 17:54:48
00:03:21
Другие видео канала
BMW N62 DON'T IGNORE THIS STAIN - HOW TO FIXvacuum pump oil leak replacement BMW 650Ci E63 4.8L 2003~2010 N62TU B48 6HP26A1DIY BMW N62 Vacuum PumpHow To Replace or Reseal Brake Vacuum PumpBMW N62 Alternator bracket/ housing gasket replacement. OIL LEAK. Common failure N62B44/ N62B48BMW N46 Vakuumpumpe dichtenBMW N62 V8 Engine Problems - SAVE IT - Don't fix later!Vacuum Pump Check, Repair??? Replace!BMW N62 Blue Smoke !!! PCV Or Valve Stem Seals ??? 545i 550i 745i 750li⭐ 2002 BMW 745i - 4.4 - Vacuum PumpBMW Brake Vacumm Pump Seal Leak Replacement Part 1VANOS BMW N62 V8 Fix Engine hesitation & Loss of power (550i,545i,645i,650i,745i,750i, x5)Periodic scraping sound. Vacuum pump?The sound of a failing vacuum pump.BMW N62 Engine - Valve Guide Seals causing smoking? Fix in 30 minutes!BMW 528I Vacuum pump failure, filling vacuum lines with oilBMW X5 V8 N62 ALTERNATOR BRACKET GASKET OIL LEAK REPAIRBMW Replacing Timing Cover & Valve Cover Gaskets N62How to replace an oil pressure switch on an n62 e65 BMW - oil leak