Grinding the Faces of the Jaws on a Three-Jaw Chuck to Reduce Runout
I had a three jaw chuck that after fitting a new back plate, I was getting more runout than I wanted. To combat the problem, I used a tool post grinder as an internal grinder to touch up the faces of the the three jaws in order to true them to the chuck.
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Grinding the Faces of the Jaws on a Three-Jaw Chuck to Reduce Runout канала Keith Rucker - VintageMachinery.org
Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
https://www.paypal.me/VintageMachinery
Please Visit: http://www.vintagemachinery.org
Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
Видео Grinding the Faces of the Jaws on a Three-Jaw Chuck to Reduce Runout канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
31 мая 2019 г. 15:59:47
00:13:10
Другие видео канала
Correcting 3-Jaw Chuck Runout the easy wayRefurbishing Lathe ChucksDisassembling and Cleaning a Three Jaw Lathe Chuck and Machining a New Back PlateGrinding the Jaws on my three jaw chuck Final version re-edited the end.SNS 205: Dumore Toolpost Grinder, Nickel Stick Welding, Hydraulic Barrel, New PatioRotary Table Chuck Mount : Let's make one!Cast Iron Repair Job: Machining a Replacement Casting and Brazing in PlaceSetting the Lathe compound to precision anglesMaking a new Vise Threaded Rod for a Mill ViseGet your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!MACHINE SHOP TIPS #147 Grinding the Jaws on a 3-Jaw Chuck tubalcainMetal Planer Restoration 63: Flat Belts Installed and... Well, that did not go as planned...Lathe Tool Cutter Height GaugeRotary Lobe Blowers Flame Spray Repair3 jaw chuck jaws, achieve no runout!? top tips for beginnersMetal Planer Restoration 38: Clapper Box Disassembly - What a MESS.....Cutting Internal Left Hand Acme Threads on the Lathe: Monarch Lathe Restoration - Part 28How to improve the accuracy of your 3 jaw chuck.Glover Steam Locomotive Dash-Pots: Re-Valved, Re-Seated, Restored!Metal Planer Restoration 69: FINALLY - The First Chips Have Been CUT!