RC4WD TF2 Upgrade: Teraflex Revolver Shackles Z-Boxes

Here’s the RC4WD Teraflex Revolver Shackles and Z-boxes for the Trail Finder 2! Even with stock shocks they add tons of articulation. Here's the TF2 kit on Amazon: http://amzn.to/2pd5dZd If you’re considering these upgrades, here’s a few things you should know:

The Revolver Shackles and Z-Boxes are EXACTLY the same as the Shooter Shackles and T-Boxes, RC4WD has just added the “Teraflex” branding. I wasn’t sure about this so I e-mails RC4WD support and they confirmed.

The RC4WD website (link below) says that the Z-boxes only fit the rear, but they actually can fit the front, you just have to install them “backwards”, with the label facing inwards and the hardware facing out to allow space for the transmission.

Even though the Z-boxes CAN be installed up front, I’m not convinced that they SHOULD be installed up front…you get so much articulation that the vehicle will tend to lean on inclines, making it more likely to flip over, and they push the front shackles forward, causing them to hit the front of the body at full compression (this does not happen with just the Revolver shackles and not the Z-boxes installed up front).

My advice is to buy 2 sets of Revolver Shackles for the front and rear, but buy just one set of Z-Boxes, at least initially. That way you can test fit them up front and decide for yourself if you prefer more articulation or less lean up front.

Copyright compliance:
RC4WD logo used with permission.
All Good In The Wood by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/

Видео RC4WD TF2 Upgrade: Teraflex Revolver Shackles Z-Boxes канала The RC Cave