Epson ET 2750 - How To Clean Printhead - Printer Error Solved

Printhead Cleaning Kit (Click Link!): https://geni.us/wArXsZT
Screw Driver: Electronics Screwdriver: https://amzn.to/2XEmcSZ
Epson 502 INK: https://amzn.to/2IlPfW1
Repair Gloves: https://geni.us/waNx

WARNING: POWER CLEANING MUST BE PERFORMED AFTER PRINTHEAD CLEANING. Please Refer to the Power Cleaning Instructions at the bottom of this page.

Video Instructions: https://youtu.be/Ui99D-rDPcA

Epson ET-2750: https://amzn.to/2INzZjS

Website: bestprinterstech.com
Amazon Prime: https://amzn.to/2MVi5kx

Step 1. Print a Nozzle Check Report.
Step 2. Go to print another nozzle check, then unplug the printer ( Make sure printer is powered off).
Step 3. Make sure ink levels are completely full before proceeding with this method.
Step 3a. Unscrew print-head cover.
Step 4. Find what color is having the most issues on the printhead.
Step 5. Flush the nozzle with cleaning solution with B.P. Cleaning Kit.
Step 6. Replace all veins and screw the printer back together.
Step 7. Turn printer on and attempt to print a nozzle Check Report.
Step 8. Print color pictures until all color come back to normal.
Step 9. Repeat process if necessary.
Disclaimer

Some links may be linked to an affiliate marketing account and Best Printers may take a small commission for any products you purchase. We are not sponsored and companies do not provide products that we review. All products on our channel have been purchased.

Claims made in repair videos are deemed reliable but not guaranteed. Each situation is unique and your printer may not be repairable. Brandon or Best Printers cannot be held liable for any damage caused to printers from the use or misuse of these instructions.

All Links above are resources to either a cleaning kit, printer, ink or other items/ services that we hope are helpful to you as the consumer. We wish you the best of luck with your printer repair and product purchase!

© 2021 Best Printers
EcoTank Use Warning, Must Run A Systme Power Cleaning:

Power Cleaning Using the Product Control Panel:

You can run a Power Cleaning using the control panel on your product.
Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning.

Turn off the product.
Visually check the ink levels and make sure each ink tank is at least one-third full.
Caution:
If you run a Power Cleaning when the ink levels are low, you may damage the product.

Press and hold the power button and the help button at the same time until you see the Power Cleaning screen.

Follow the instructions on the LCD screen to run the Power Cleaning.
When the Power Cleaning is finished, run a nozzle check.

If the print quality did not improve, turn off the product and wait at least 12 hours before running another Power Cleaning.

If the print quality does not improve after running the Power Cleaning utility multiple times, contact Epson for support.
-Epson.com
https://epson.com/faq/SPT_C11CG22203~faq-000080a-et2760?faq_cat=faq-8796127242316

Видео Epson ET 2750 - How To Clean Printhead - Printer Error Solved канала Best Printers