Follow to see slicer details.

Use below settings for slicer:
Key Slicer Settings for Miniatures
• Nozzle: 0.2 mm or 0.25 mm
• Layer Height: 0.08 mm
• Wall Count: 3
• Top/Bottom Layers: 4
• Speed:
• Outer Wall: 20–25 mm/s
• Inner Wall: 30 mm/s
• Travel: 90–120 mm/s
• Supports: Organic, 10–15%, 50° overhang
• Retraction: 0.8–1 mm at 25–35 mm/s
• Cooling: 100% fan after first few layers
• Temperature (PLA): 200–210°C / Bed: 60°C
• Flow Rate: 95–98%
• Seam: Rear or aligned
• Min Layer Time: 5–8 sec with “Lift Head” if needed
• Use high-detail filaments: matte, silk, or resin-like PLA

Видео Follow to see slicer details. канала Learn 3D Printing