My Cam Setup in under Five Minutes

I get lots of requests asking about my cam setup - it's actually very simple.
- Main 'bench' camera is a Logitech BRIO at 1080p60. It's mounted using a bunch of random screw fittings to a mic clamp-stand to give the range of movement.
- Face cam is Logitech C920, which sits on the lower or upper monitor depending on if I'm sitting or standing in the video.
- Both cameras are in manual focus manual white balance from within Logitech Settings, 78 FOV and 50Hz anti-flicker.
- Mic is a Samson CO1U. I use a bit of gain, a background noise filter, and a limiter filter in OBS.
- Lights are Neewar 40w LED panels and an overhead 30w LED baton.
- My HDMI capture card is an Elgato GameCapture HD, which is bad and I recommend an AVer Media instead.
- I run OBS Studio for recording and visual mixing, 12MBps NVENC encoding.
- I record in FLV, which requires transcoding before I edit. However, I can pause recordings, and if the PC crashes mid-record, the session is still saved.

In terms of cost, the entire setup is pretty dang cheap by video production standards. Capture card is optional depending on your needs, and the BRIO can be swapped for another C920/C930 if you don't need 60fps.
I think that's everything, but I'm sure I'll tweak this description later, and also add product links if you want to buy similar stuff.

Видео My Cam Setup in under Five Minutes канала Adamant IT