Загрузка страницы

Red Eagle Model Hummer 3D EPP RC Plane Build Review

This is the http://rcvideoreviews.com build review of the Value Hobby Hummer 3D EPP Profile RC Plane.

I've been having so much fun with that little HobbyKing MX2 I decided to try one of these little profile planes out as well based on the recommendation of channel subscribers.

There is nothing terribly difficult about putting this plane together especially if you've got some experience with RC planes. If you've never put a plane together, this one might be a little challenging because the instructions are sparse and the pictures are very very small.

My setup:

Motor: Sunnysky x2216 v3 1250Kv
Prop: APC 10x4.7sf
ESC: Detrum Skylord 40a
Battery: Roaringtop 1300mah 3s 45c LiPo
Servos: Generic MG90s 9g from Amazon (2 3" extensions required for Rudder/Elevator)

T-Shirts: https://teespring.com/stores/rcvideoreviews

RCVR Amazon Basics List
Solder Station Heavy Duty Helping Hands: https://amzn.to/32WInJN
ToolkitRC WM150 Watt Meter https://amzn.to/2A13Ogu
Generic Watt Meter https://amzn.to/377epmg
KaCallap LiPo Discharger https://amzn.to/3khIAxk
10 Pack XT60 Connectors with shrink tube: https://amzn.to/2zVBWdB
50 Pack 3.5mm Bullet Connectors: https://amzn.to/3dw8pot
10 Pack 300mm Servo Extensions: https://amzn.to/3dVBRoi
Heat Shrink Tubing: https://amzn.to/3ezjIxB
ZTW 10a peak/6a cont BEC 6v/5.5v/5v: https://amzn.to/2ZdAA6S
ZTW 40a ESC with XT60 Installed: https://amzn.to/3fPu2ll
ZTW 60a ESC with XT60 Installed: https://amzn.to/2CqrNGH
ZTW 80a ESC with XT60 Installed: https://amzn.to/2ZLIUuS
ZTW Programming Card: https://amzn.to/2BuHZqb
MG90s 9g Servo 5 Pack: https://amzn.to/315Kmuh
ISDT LiPo Balance Checker: https://amzn.to/2Z0HOee
Generic LiPo Balance Checker: https://amzn.to/3drCO7B
FrSky S6R Rx with Stabilizer: https://amzn.to/320IrHU

Видео Red Eagle Model Hummer 3D EPP RC Plane Build Review канала RC Video Reviews
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
6 августа 2020 г. 18:24:58
00:12:37
Яндекс.Метрика