RANS S-21 (118) Elevator trim servo and balancing
Home stretch for projects that can be done before moving to the hangar :)
I went back and finished sanding off any protruding rivet stems on the wings, then installed the elevator trim servo and balanced the elevator.
Видео RANS S-21 (118) Elevator trim servo and balancing канала Derek Kenney (simdpk)
I went back and finished sanding off any protruding rivet stems on the wings, then installed the elevator trim servo and balanced the elevator.
Видео RANS S-21 (118) Elevator trim servo and balancing канала Derek Kenney (simdpk)
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![First Solo 12 19 10](https://i.ytimg.com/vi/qlE0WSVcxZw/default.jpg)
![6 10 11 Cut n Break saw](https://i.ytimg.com/vi/C2a1B6XJtpM/default.jpg)
![Modular House Project Part 3 The Foundation 5-19-11.wmv](https://i.ytimg.com/vi/Zae5N9yKZ0g/default.jpg)
![GoPro RC Heli Blade CX2 w Flip and Crash](https://i.ytimg.com/vi/oE93MV89shY/default.jpg)
![RANS S-21 (069) Fwd baggage side panels and seat side panel mounts](https://i.ytimg.com/vi/yrJNfHUOKOI/default.jpg)
![RANS S-21 (081) Center console part 4 design change](https://i.ytimg.com/vi/GeIpplMr15k/default.jpg)
![practice in Piper Sport 4 10 11 simdpk](https://i.ytimg.com/vi/evhAPSMCkKQ/default.jpg)
![RANS S-21 (091) Smoke oil pump installation](https://i.ytimg.com/vi/5d94gIxavnY/default.jpg)
![RANS S-21 (098) Firewall prep for hanging engine](https://i.ytimg.com/vi/fdUPjRdH3OQ/default.jpg)
![RANS S-21 (107) Hoses, tubes and cables FWF](https://i.ytimg.com/vi/M2BGyrrcR9Q/default.jpg)
![RANS S-21 (142) Moving day and wing installation](https://i.ytimg.com/vi/UQ7Bo-_TJpc/default.jpg)
![RANS S-21 (048) Sealing and riveting the firewall together and using sealant for skin dampening](https://i.ytimg.com/vi/atFGeOne5jo/default.jpg)
![RANS S-21 (042) Boot cowl oopsy leads to floor board and installation](https://i.ytimg.com/vi/oPQzsxLexrY/default.jpg)
![R44 Boston Tour 5-3-15](https://i.ytimg.com/vi/akIcmf2PBIk/default.jpg)
![RANS S-21 (137) Making some special tools, dash vents, G5 ant mount and lots'o plugs](https://i.ytimg.com/vi/3s3lEsnlgKo/default.jpg)
![RANS S-21 (122) Baffle seal](https://i.ytimg.com/vi/LxTwUqoFo80/default.jpg)
![RANS S-21 (099) Engine prep for hanging part 1](https://i.ytimg.com/vi/H71MGzEBEO8/default.jpg)
![RANS S-21 (006) Horizontal stabilizer build](https://i.ytimg.com/vi/QhSrd1b18-0/default.jpg)
![RC Heli tree crash gopro](https://i.ytimg.com/vi/a64p2_g_A_M/default.jpg)
![RANS S-21 (045) Control stick assembly](https://i.ytimg.com/vi/oqCeRBpcx9w/default.jpg)
![RANS S-21 (008) Tail section build](https://i.ytimg.com/vi/NKDgHMj2qu8/default.jpg)