INEXPENSIVE DIY SKI & SNOWBOARD WAXING/TUNING VICE

Homemade ski or snowboard stand/vise for waxing and tuning. This can be easily be made at home in about 20 minutes with a saw, hammer and screw gun. Material list below. Enjoy!
Dimensions:
48" wide (end to end) x 10" deep (front to back) x 10" tall
Center Slot for vertical ski holder is: 3/4" wide x 2.5" Deep

Materials (with affiliate links):
2 Carabiners with Locking Cams and 4' of Para-cord: https://amzn.to/2YQ9WkU
8' Pine 2"x10" Board - Local Home Improvement Store
Bike Tube - https://amzn.to/3fj240U
Drywall Nails or Staples (To tack on Inner-tube)- https://amzn.to/30c4ZEg
Box of 2.5" Wood Screws: https://amzn.to/2P8rpzL
2 I-Screws: https://amzn.to/2P4S9RR
Total Material Cost: About $40

Camera: https://amzn.to/312uw1I
Lens: https://amzn.to/39IPy9x

Видео INEXPENSIVE DIY SKI & SNOWBOARD WAXING/TUNING VICE канала Chase Christopher