3rd Gen Toyota 4Runner 2" Lift Install - Easiest Way To Install A Lift

In this video, I show you how to install a 2" lift on your 3rd gen Toyota 4runner. I have another video on my 3-4" lift but I wanted to make a complete video for someone coming from a stock 3rd Gen 4Runner.

Check out my other video for other tips but I found this is the easiest way to install a lift.
https://youtu.be/mnHvnvTjZyM

Front Lift Parts:
Tundra TRD Coils
Driver Yellow/Yellow 48131-AF100 https://parts.earnhardttoyota.com/oem-parts/toyota-coil-spring-left-front-48131af100
Passenger Yellow/Blue 48131-AF090 https://parts.earnhardttoyota.com/oem-parts/toyota-coil-spring-right-front-48131af090
Tundra Bilstein 5100 24-261425 https://amzn.to/3xUE9hO

Optional (if not pre-assembled):
Tundra Spring Isolator https://amzn.to/3qvwSlW
4Runner Top Hat + Spring Isolator https://amzn.to/3A5DKLc or https://parts.earnhardttoyota.com/oem-parts/toyota-shock-mount-left-right-front-4860935030

Rear Lift Parts:
ARB/OME 906 Coils https://amzn.to/3zYcM8B
4Runner Bilstein 5100 24-249966 https://amzn.to/35URydP

Blue Lock Tite https://amzn.to/3qrZSvb
Mission Automotive Silicone Paste https://amzn.to/3jibIpT

Tools:
3/8" Metric Set https://amzn.to/3jfxTNt
1/2" 17mm 19mm Shallow Socket
17mm Open Wrench
12mm + 14mm Flex Head Ratchet https://amzn.to/2u2B8ke
5mm Hex Socket https://amzn.to/3dl7udp
Stubby Ratchet https://amzn.to/3dkpgxn
Pry Bar Set https://amzn.to/3y3fyYp
3 Ton Jack https://www.harborfreight.com/3-ton-rapid-pump-floor-jack-56624.html
6 Ton Jack Stands (2) https://amzn.to/3jjeFa2
1/2" Torque Wrench https://amzn.to/3jiphpB
Large Channel Locks https://amzn.to/3A2raMX
Toyota Bottle Jack (check your rear passenger seat)
Block of 2x4 wood

Optional Tools:
Lug Nut Service Set https://amzn.to/3zYdvql
M12 Ratchet https://amzn.to/3jjugpK
M12 Impact https://amzn.to/3zVUzIy
Spring Compressor (if not preassembled) https://amzn.to/31YRMhf

Torque Spec:
Front Strut:
Top 3 Strut Nuts 47 ft/lb 14mm
Lower Shock Bolt 101 ft/lb 19mm
Strut Top Nut 18 ft/lb 19mm

Rear Shock:
Top Shock Nut 14 ft/lb 14mm (stock) / 17mm + 5mm Hex (Bilstein)
Lower Shock Bolt 47 ft/lb 17mm
End Links 14 ft/lb 12mm

Tires/Wheel:
Lug Nuts 83 ft/lb 21mm

Lift Options:
https://www.toyota-4runner.org/3rd-gen-t4rs/66976-3rd-gen-4runner-lift-information-faqs.html
https://www.toyteclifts.com/bk9602-3-lift-toytec-bilstein-kit-for-96-02-4runner.html
https://yotamafia.com/product/1995-2002-toyota-4runner-lift-kit/

#4runnerlift #toyotalift #4runnermods

► Buy me a coffee if I helped you with this video! https://www.buymeacoffee.com/phorunner
► Support this channel by buying some 4Runner Merch! https://teespring.com/stores/phorunner

Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Enjoy my videos.

As an Amazon Associate, I earn a small commission from qualifying purchases. This cost you nothing and helps support my channel! Thanks!

Видео 3rd Gen Toyota 4Runner 2" Lift Install - Easiest Way To Install A Lift канала PhoRunner Channel