iPad 5 (9.7") Left/Right Antenna Repair Guide - Fixez.com

9.7-inch iPad 5 Repair Parts: http://bit.ly/2oTlBKT

Watch the Official 9.7" iPad 5 Antenna Repair Guide. Following the step-by-step iPad 5 repair instructions we have provided will help you safely repair a damaged or faulty iPad 5 antenna. Visit Fixez.com for all of the DIY iPad 5 replacement screens, parts and tools you need to fix your tablet quickly, and affordably.

If you need your Apple iPad 5 repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your device for you. They are available Monday - Friday, 9am to 5pm PST.

Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

iPad 5 (9.7) Antenna Repair Video Steps:

Step 1

• Power down your 9.7-inch Apple iPad 5 tablet.

Step 2 (iPad 5 LCD Screen and Touch Screen Digitizer/Front Panel)

• The iPad 5 touch screen digitizer is glued on solidly and is a tight fit within the rear case. Apply heat to soften the adhesive beneath the glass.

• Use the precision knife to create enough space to insert a triangle opening tool.

• With the triangle opening tool slice thru the sticky adhesive and decouple the iPad 5 digitizer. Be very careful not to cut or damage any of the display cables.

• Don't try to fully separate the touch screen yet, as several fragile ribbon cables still connect it to the iPad’s logic board. Once the adhesive has been separated, open the digitizer like a page in a book and rest it on your workspace.

• Remove all tape obscuring the LCD screws.

• Extricate the following 4 Phillips screws.

• Grab the LCD and lift it out of its recess. Be gentle and keep an eye on the LCD cable.

• Remove the following 3 Phillips screws from the display cable bracket.

• Pry the display cable bracket straight up from the logic board and remove the iPad 5 LCD.

• Remove the small piece of tape covering the home button ribbon cable connector.

• Use the flat end of a spudger to flip the tab on the home button ribbon cable ZIF connector upward. Pull the home button ribbon cable straight out of the ZIF connector.

• With a spudger in hand, carefully pop the two digitizer cable connectors straight up from their sockets.

• Remove the iPad 5 Touch Screen Digitizer.

Step 3 (iPad 5 Left Antenna and Right Antenna)

• Pop the two antenna cable connectors straight up from their sockets.

• Remove the following 6 Phillips screws.

• Use the tweezers to cut the foam adhesive securing the antenna to the speaker assembly.

• Carefully remove the right antenna from the iPad.

• Cut the foam adhesive securing the antenna to the speaker assembly.

• There are six pieces of tape wrapped around the left antenna cable. Gently peel up each piece of tape, freeing the left antenna cable as you go.
* To reassemble your device, follow the steps in reverse order.

Видео iPad 5 (9.7") Left/Right Antenna Repair Guide - Fixez.com канала Fixez.com