Mounting The 22 Designs Lynx Binding (With a Template)

Chris from 22 Designs gives a walk thorough of how to mount the Lynx Telemark Binding with a Plastic or Paper Template (available on the 22 Designs website)

Lynx Bindings:
https://www.twentytwodesigns.com/Lynx-Telemark-Binding_p_124.html

Plastic Template (Recommended) :
https://www.twentytwodesigns.com/Clea...

Paper Template:
https://www.twentytwodesigns.com/tech...

Accessories:
https://www.twentytwodesigns.com/Acce...

Schwag:
https://www.twentytwodesigns.com/Schw...

------------------------------------------------------

Tools Needed:
- Tele Boot
- Bindings
- Skis
- Drill With #3 Pozidriv Bit https://www.tognar.com/pozidriv-3-power-drive-bits/
- 3.5 mm Drill Bit for skis without a metal top sheet https://www.tognar.com/mounting-drill-bits-for-ski-bindings/
- 4.1mm Drill Bit for skis with a metal top sheet https://www.tognar.com/mounting-drill-bits-for-ski-bindings/
- #3 Pozidriv Screwdriver https://www.tognar.com/wiha-pozidriv-3-screwdriver-for-ski-bindings/
- Waterproof Wood Glue (Titebond recommended)
- Syringe or matchstick
- #12 AB Ski Tap (if your ski has metal top sheets https://www.tognar.com/alpine-ski-binding-mounting-tap-12ab-w-handle/
- Measuring Tape
- Tape

------------------------------------------------------

Sections:
0:00 - Introduction
0:53 - Necessary Tools
1:56 - Pre - Drilling
4:57 - Drilling
5:36 - Gluing
6:40 - What's In The Box?
5:54 - Binding Assembly
7:03 - Mounting
10:56 - Maintenance & Accessories

Видео Mounting The 22 Designs Lynx Binding (With a Template) канала 22 Designs