Here is how to solve the manual light error of T-fal optigrill -recaliberation GC702853

Troubleshooting for T-Fal optigrill manual light problem as I have received from T-Fal customer service. Please, follow the below steps carefully. Note, that you will not press the power button during these steps.

T-Fal OptGrill Manual mode fix
*A spacer can be anything, like a cookbook, as long as it is 1 1/2 inches thick. Do not turn the grill on until you are finished the troubleshooting.
1- Plug in the unit press and hold for 3 seconds ( Burger + Fish + Manual ) at the same time.
2-The Steak button will flash 3 times
3-Once the Steak button is solid, Open the grill, place the spacer ( 1 ½ High ) then close the lid.
4-Press the Steak button and let it go, it will flash 3 more times.
5-Open the Grill lid and remove the spacer and close the lid.
6-Unplug the grill.

If the unit light turns off follow the instructions below

7-Plug in the unit press and hold for 3 seconds ( Burger + Poultry + Manual ) at the same time until your display beeps and shows the blue light.
8-Open the lid
9-If the unit light turns off follow the instructions below
Insert spacer
Close lid
10-After 3 seconds the unit light will turn green then beep.
11- Open lid, Light will turn red and the unit will beep.
Remove the spacer and close the lid
12-Press the power button 3 times and you will see the light will change
Between the manual modes.
Yellow – Orange - Red
13-Unplug the unit
You’re done.

I hope this helps :)
Please, like my video if it worked .

Видео Here is how to solve the manual light error of T-fal optigrill -recaliberation GC702853 канала Noha El-Bakry