- Популярные видео
- Авто
- Видео-блоги
- ДТП, аварии
- Для маленьких
- Еда, напитки
- Животные
- Закон и право
- Знаменитости
- Игры
- Искусство
- Комедии
- Красота, мода
- Кулинария, рецепты
- Люди
- Мото
- Музыка
- Мультфильмы
- Наука, технологии
- Новости
- Образование
- Политика
- Праздники
- Приколы
- Природа
- Происшествия
- Путешествия
- Развлечения
- Ржач
- Семья
- Сериалы
- Спорт
- Стиль жизни
- ТВ передачи
- Танцы
- Технологии
- Товары
- Ужасы
- Фильмы
- Шоу-бизнес
- Юмор
PLA wasn't strong enough and the servo arm broke
PLA filament on the Iron Man servo bracket didn't hold and the arm snapped, so we stopped and reprinted in PETG.
The original part was printed early in our 3D printing journey before we had settings dialed in. The heat set inserts had the same problem and were falling right through the holes.
After reprinting both in PETG they seem to fit the way they should.
Full build on the channel.
#3DPrinting #PETG #IronManBuild #3DPrintFail #TheBondingBlueprint
Видео PLA wasn't strong enough and the servo arm broke канала TheBondingBlueprint
The original part was printed early in our 3D printing journey before we had settings dialed in. The heat set inserts had the same problem and were falling right through the holes.
After reprinting both in PETG they seem to fit the way they should.
Full build on the channel.
#3DPrinting #PETG #IronManBuild #3DPrintFail #TheBondingBlueprint
Видео PLA wasn't strong enough and the servo arm broke канала TheBondingBlueprint
Комментарии отсутствуют
Информация о видео
20 мая 2026 г. 6:01:46
00:00:43
Другие видео канала
How we Add Bright, Safe Lighting to Any Kid Ride-On Vehicle
Don't buy another ride on, build this instead!
Room Echo Destroying Your Recordings? Try This
Gaming, Building, and Growing | The Real Reason We Started This
Here's Everything in the Infento Ultimate Kit (Plus Our Organizing Hack)
This tool strips wires perfectly every single time
The soldering trick most beginners get backwards
LEGO Light Kits with Kids! Fun Upgrade or Too Much Work?
Our First Year on YouTube – What We Built in 2025 & What’s Next in 2026!
Dad Walked Right Into Our Tripwire! | CrunchLabs Kit #3 Build + Review
EP 02 This Dinkum Town Is Actually Starting to Look Like Something!
Why This CrunchLabs Coin Spinner is So Genius
EP01 We Restarted Our Dinkum Playthrough and It Was Worth It!
This Robot Draws Better Than We Expected | Here's Why
We Tested Mark Rober's New Crunchlabs Kit | Here's What We Think
We Spent Months Collecting Parts to Build This PC - Here's Why
Making the Iron Man Helmet Move Was Harder Than Printing It
Father & Son Build the LEGO Technic Kawasaki Ninja H2R | Family Build Time
Will It Turn On? New Gaming PC Build Wiring, BIOS Setup & Windows Install Part 2
We lost the Dinkum footage. Starting over.
