How to Replace the CV Boot on a Driveshaft - Clean & Grease + Band Installation | Tech Tip 25

Split CV boot? It happens. If you catch it early enough there's every possibility a good clean up, re-grease, & new boot will get you going again. That's what I'll be doing in this Tech Tip - cutting off the old torn boot, removing & cleaning the CV joint, then re-installing it with fresh grease & a brand new boot - finally securing it in place with some new bands. WARNING : things are about to get dirty.

► If you want to see how I removed the driveshaft from this vehicle, this link will take you there:
https://youtu.be/D0z_LVoE61Q

► Or, if you want to see how to reinstall the driveshaft, click the link below:
https://youtu.be/mGe2VUwfB6g

The vehicle in this video is my trusty 2005 Ford Ranger 2.5TDI. If you have one of these trucks, or are just looking for more Ford Ranger related content, check out this playlist right here:
https://www.youtube.com/playlist?list=PLx54n6KmznFZfWqI7-uYK9o4AwNJgxHF3

🔴 Subscribe for more free Tech Tips: https://www.youtube.com/c/fastrust?sub_confirmation=1

► Background music : https://www.bensound.com/royalty-free-music

Видео How to Replace the CV Boot on a Driveshaft - Clean & Grease + Band Installation | Tech Tip 25 канала Fast Rust