Printer Fumes Gone - Designing and 3d Printing a Vent - 3D Printer Ventilation System
The 3d printer fumes really get to me. So I designed and printed a ventilation box with an integrated fan. In this video I go over the desin, show what went wrong, and print it and install it in the wall.
All printer files are here: https://www.thingiverse.com/thing:4181012
Some of the links below are affiliate links and help support my channel:
The vent hood for the outside of the house - https://www.lowes.com/pd/Lambro-Dryer-Vent-Hood/3242456
Fan - https://amzn.to/3a62JQY
Power Supply and Adapter - https://amzn.to/384b7Pv
Magnents 8x3 mm - https://amzn.to/2VebCmm
About the files:
The prints I did here I accidentally exported on Medium quility instead of High quality. So that's why the circles and curves are a little rough. The files on Thingiverse were re-exported for better quality.
Also I designed this with .5 mm clearance everywhere. This was an overkill. .25 would have been good enough. I tweaked some of this before posting on Thingiverse.
I also added screw holes to the outer corners of the baseplate as an option to use those.
Also note that while I didn't show it in the video I did use anchors in the drywall.
Finally - Newer versions of the Transform printer have 3 fans blowing in and only one blowing out. So in that case you would only need to print one of the adapters and you'd probably want to cap the extra intake on the vent. Or use it for a 2nd printer.
Some of my normal supplies:
Food trays that I put in front of my printer to catch parts on. These are ridgid and therefore a little better at holding liquid and spills than the ones in my resin handling video: https://amzn.to/3lo3bQK
Rubber Mats - a lot cheaper than wham bam - https://amzn.to/3pmhfws
Metal Funnels - https://amzn.to/39ZU56y
IPA - https://amzn.to/2T0uFzS
Spray Bottles - https://amzn.to/2T2q7t2
Nitrile Gloves - https://amzn.to/2Tm6T0c
My Mask - https://amzn.to/3cgvWL5
Tea Strainer for Recycling IPA - https://amzn.to/3c7ZJFr
And this is my favorite resin: https://amzn.to/3kln4qe
Видео Printer Fumes Gone - Designing and 3d Printing a Vent - 3D Printer Ventilation System канала Nerdtronic
All printer files are here: https://www.thingiverse.com/thing:4181012
Some of the links below are affiliate links and help support my channel:
The vent hood for the outside of the house - https://www.lowes.com/pd/Lambro-Dryer-Vent-Hood/3242456
Fan - https://amzn.to/3a62JQY
Power Supply and Adapter - https://amzn.to/384b7Pv
Magnents 8x3 mm - https://amzn.to/2VebCmm
About the files:
The prints I did here I accidentally exported on Medium quility instead of High quality. So that's why the circles and curves are a little rough. The files on Thingiverse were re-exported for better quality.
Also I designed this with .5 mm clearance everywhere. This was an overkill. .25 would have been good enough. I tweaked some of this before posting on Thingiverse.
I also added screw holes to the outer corners of the baseplate as an option to use those.
Also note that while I didn't show it in the video I did use anchors in the drywall.
Finally - Newer versions of the Transform printer have 3 fans blowing in and only one blowing out. So in that case you would only need to print one of the adapters and you'd probably want to cap the extra intake on the vent. Or use it for a 2nd printer.
Some of my normal supplies:
Food trays that I put in front of my printer to catch parts on. These are ridgid and therefore a little better at holding liquid and spills than the ones in my resin handling video: https://amzn.to/3lo3bQK
Rubber Mats - a lot cheaper than wham bam - https://amzn.to/3pmhfws
Metal Funnels - https://amzn.to/39ZU56y
IPA - https://amzn.to/2T0uFzS
Spray Bottles - https://amzn.to/2T2q7t2
Nitrile Gloves - https://amzn.to/2Tm6T0c
My Mask - https://amzn.to/3cgvWL5
Tea Strainer for Recycling IPA - https://amzn.to/3c7ZJFr
And this is my favorite resin: https://amzn.to/3kln4qe
Видео Printer Fumes Gone - Designing and 3d Printing a Vent - 3D Printer Ventilation System канала Nerdtronic
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Why Resin 3D Prints Fail - Improve Your Prints - Tips on Understanding Overhangs and Supports](https://i.ytimg.com/vi/pbYAhjASGFY/default.jpg)
![Anycubic Mono X Vent Adapter and Fan Reverse](https://i.ytimg.com/vi/p2QjTJqcA-8/default.jpg)
![Making a cabinet for my 3D printers](https://i.ytimg.com/vi/DrZVF6uOayg/default.jpg)
![Peopoly Phenom L Ventilation System [3D Printer Ventilation]](https://i.ytimg.com/vi/F2Z537HW7cw/default.jpg)
![Shop Talk - Fume Evacuation From Lasers and 3D Printers!](https://i.ytimg.com/vi/2HYl5sbR39I/default.jpg)
![Designing & 3D Printing Dog Tags - How To Create a Relief for a Coin or Dog Tag with Depth & Detail](https://i.ytimg.com/vi/5JHPcua93pg/default.jpg)
![3D Printer Enclosure - Adding an extractor fan with HEPA & Carbon filters](https://i.ytimg.com/vi/rmNoYk61Rwo/default.jpg)
![Getting Into Resin 3D Printing in 2021 - Ultimate SLA Beginners Guide](https://i.ytimg.com/vi/TuubPMWeQQE/default.jpg)
![Resin 3D Printing: Do Air Filters Make Resin Printing Safe? (Elegoo Mars Pro Review)](https://i.ytimg.com/vi/r0BVyFg7ddM/default.jpg)
![5 Tips for Building a 3D Printer Enclosure](https://i.ytimg.com/vi/wt6seC-FbMk/default.jpg)
![Get Accurate Prints - Calibrating Your SLA 3d Resin Printer](https://i.ytimg.com/vi/-rEUyR9yoBI/default.jpg)
![Why I Enclosed My 3D Printer, and How I did It!](https://i.ytimg.com/vi/Dc16H6LvX30/default.jpg)
![Air Scrubber for a 3D Printer Enclosure - Assembly Instructions](https://i.ytimg.com/vi/FSXe7_GZbmo/default.jpg)
![Print on 2 Plates at the Same Time! - Phrozen Transform Dual 5.5 Panel Installation and Review](https://i.ytimg.com/vi/mMLgvZGdfcA/default.jpg)
![3D Printing in a 100°C Heated Chamber - Lessons Learned](https://i.ytimg.com/vi/79r5D9nCQfM/default.jpg)
![Ph.D. Chemist Explains 3D Printer Resin](https://i.ytimg.com/vi/ht4tbCiFxeM/default.jpg)
![No More Stinky Resins! Elegoo's Plant-Based Resin & Mini Air Purifiers](https://i.ytimg.com/vi/Ev2IeJ1vdQ0/default.jpg)
![I Made Chocolates from a 3D Printed Mold and Food Safe Silicone](https://i.ytimg.com/vi/DRcFh_Kop9U/default.jpg)
![Elegoo resin vs. Prusa resin vs. PETG vs. PLA](https://i.ytimg.com/vi/a6m_GnN5j4c/default.jpg)
![Remove the Elephant's Foot from Resin 3D Prints - Plus NEW FREE Bulge Buster App](https://i.ytimg.com/vi/piz9VY-1Cfk/default.jpg)