3D Printing | What's a slicer? My Cura workflow!
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
How to download a STL file and print it? You need a slicer. What's a slicer? That's what you'll learn in this video. I'll show you my Cura 4.4 workflow so you can download an STL from Thingiverse, slice it, and print it.
My 3D Printing playlist, including review and setup for Sovol SV01 and Ender 3 Pro: https://www.youtube.com/playlist?list=PLwoDb7WF6c8ksI_lD79bpPWFK5CT2CvE4
If you want to download my Cura profiles and try them out, here's a link: https://1drv.ms/u/s!Al4b3QGPtgasntUp36DYQ3Kke1eAhQ
I do not claim that these are the best or even particularly good but I know some people are going to want to try them out so here they are. I will update the contents of that folder as I come up with new and better settings.
Видео 3D Printing | What's a slicer? My Cura workflow! канала Joshua Bardwell
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
How to download a STL file and print it? You need a slicer. What's a slicer? That's what you'll learn in this video. I'll show you my Cura 4.4 workflow so you can download an STL from Thingiverse, slice it, and print it.
My 3D Printing playlist, including review and setup for Sovol SV01 and Ender 3 Pro: https://www.youtube.com/playlist?list=PLwoDb7WF6c8ksI_lD79bpPWFK5CT2CvE4
If you want to download my Cura profiles and try them out, here's a link: https://1drv.ms/u/s!Al4b3QGPtgasntUp36DYQ3Kke1eAhQ
I do not claim that these are the best or even particularly good but I know some people are going to want to try them out so here they are. I will update the contents of that folder as I come up with new and better settings.
Видео 3D Printing | What's a slicer? My Cura workflow! канала Joshua Bardwell
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Using Meshmixer to remix two 3D objects from ThingiverseEnder 3 Pro $200 vs . Sovol SV01 $300 (best first 3D printer?)Sovol SV-01 BLtouch and Silent Mainboard InstallCan Velocidrone make me a better drone racer | SIMULATOR VS REAL LIFEMesh Bed Leveling for Sovol SV-01 & Ender 3 Pro (including flash bootloader)3d Printing For Beginners, Cura 3d SlicerThe 3D printing revolution | DW DocumentaryLargest 3D printer under $450? SOVOL SV033d Printing Carbon Fiber Nylon For Beginners (Ender 3)[Updated] The Ultimate Beginner's Guide to Cura Slicer!3d Printing Two Top Slicers ComparedPlasmatree PID Analyzer | SETUP & TUNING A QUADTop 5 Most Useful 3D Prints! (2020)Faster 3d Prints: Take 2, Do Slicers Lie?How to Download and Slice 3D Models from Thingiverse using Cura - Tutorial for BeginnersWhy the Sovol SV01 is my first 3d printer | PRINTS TPU OUT OF THE BOX?JB's Acrobrat build goes COMPLETELY WRONG | part 36 filament dryer test - which one dries better? eBox, eBox Lite, Sunlu, Sovol, Creality, EibosBest FREE CAD Programs for 3D PRINTING