Phil Lardners Carbon Dragon Project 5 Shaping the Leading Edge Moulds
Видео Phil Lardners Carbon Dragon Project 5 Shaping the Leading Edge Moulds канала Phil Lardner
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Phil Lardner's Carbon Dragon Project - Trimming the Horizontal Stabiliser Front Spar
2nd Thermal Flight Aspres, France - 11 Sept 2018 - (HiRes version)
Hiving a Swarm of Bees - 2
Fabricating the Plug & Mould for Phil's Carbon Dragon Pilot Pod #2
Phil Lardner's Carbon Dragon Project - 8 - Infusing the Tail Boom Skins
Phil Lardner's Carbon Dragon Project - 6 - Covering the Leading Edge Foam Plug in Fiberglass
Phil Lardner's Carbon Dragon Project - Fabricating Flat Sheet Stock
Hang Gliding at Killiney 22 Sept 2012
Phil Lardner's Carbon Dragon Project - 1 - Vacuum Assisted Resin Infusion
Phil Lardner's Carbon Dragon Project - FreeCAD Model Tour
Learning to fly the Carbon Dragon - Aspres France - 2019-06-26
Phil Lardner's Carbon Dragon 1st Bungee Launch Test
Ken Hickey's first Swift landing
Phil Lardners Carbon Dragon Project - Bonding the Tail Boom Halves Together
Learning to Fly the Carbon Dragon - Landing at Aspres, France
Phil Lardner's Carbon Dragon Project - 9 - Rib Trimming
Resin Infusing parts for Ken's Swift Light
Phil Lardner's Carbon Dragon Project - 7 - Shaping the Outer Leading Edge Foam Plug
Patrick Early - Achill Island launch - June 2014
Run Forest, Run!